Daniel Albrecht

Hi!

RDM 2023.2.14.0, DVLS 2023.2.3.0

When I click on the "Opened sessions" tab in the navigation, and then select "Running sessions (Global)" I get the following error

ArgumentNullException - Value cannot be null.

Parameter name: list

at System.ThrowHelper.ThrowArgumentNullException(ExceptionArgument argument)

at Devolutions.RemoteDesktopManager.Frames.FreOpenedConnections.LoadGlobalOpenedConnections()

at Devolutions.RemoteDesktopManager.Frames.FreOpenedConnections.LoadOpenedConnections()

at Devolutions.RemoteDesktopManager.Frames.FreOpenedConnections.CbSessionMode_SelectedIndexChanged(Object sender, EventArgs e)

at DevExpress.XtraEditors.Repository.RepositoryItemComboBox.RaiseSelectedIndexChanged(EventArgs e)

at DevExpress.XtraEditors.ComboBoxEdit.UpdatePopupEditValueIndex(Int32 prevIndex)

at DevExpress.XtraEditors.ComboBoxEdit.set_EditValue(Object value)

at DevExpress.XtraEditors.PopupBaseEdit.AcceptPopupValue(Object val)

at DevExpress.XtraEditors.ComboBoxEdit.UpdateEditValueOnClose(PopupCloseMode closeMode, Boolean acceptValue, Object newValue, Object oldValue)

at DevExpress.XtraEditors.PopupBaseEdit.DoClosePopup(PopupCloseMode closeMode)

at DevExpress.XtraEditors.Popup.SimplePopupListBox.OnMouseUp(MouseEventArgs e)

at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)

at System.Windows.Forms.Control.WndProc(Message& m)

at DevExpress.XtraEditors.XtraControl.WndProc(Message& m)

at DevExpress.Utils.Controls.ControlBase.BaseWndProc(Message& m)

at DevExpress.XtraEditors.BaseControl.WndProc(Message& msg)

at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

------------------------ extended stack ------------------------

at Devolutions.RemoteDesktopManager.Managers.ErrorManager.BuildErrorDetails(Exception exception, String extraMessage)

at Devolutions.RemoteDesktopManager.Forms.FrmErrorMessage.ShowErrorMessage(Exception exception, String message, String title)

at Devolutions.RemoteDesktopManager.Managers.LogManager.OnThreadException(Object sender, ThreadExceptionEventArgs t)

at System.Windows.Forms.Application.ThreadContext.OnThreadException(Exception t)

at System.Windows.Forms.Control.WndProcException(Exception e)

at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)

at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)

at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(IntPtr dwComponentID, Int32 reason, Int32 pvLoopData)

at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)

at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)

at Devolutions.RemoteDesktopManager.Program.Main(String[] args)

ESC only clears the search when the search field is in focus. Can you make it so it also clears the search when the tree list (or any other part of RDM) is in focus?

wait... how long was I gone?

test post please ignore

Thank you, that worked!

Hello!

I get the following message when I try to uninstall RDM 13.0.6 asking for "Setup.RemoteDesktopManager.13.0.6.0.msi"

I managed to download that exact msi file, but when I select it in the dialog it says "The file [...] is not a valid installation package for the product Remote Desktop Manager"

I managed to manually install 13.5 in addition to the old one, but I'd like to get rid of both and reinstall, because I'm having some problems with VPNs asking for a password all the time.

Thank you!

I just noticed it also shows the password in plain text while this message is displayed.

This message also pops in front if VPN mode is set to "Confirm disconnect". It would be much better if it could just request focus by blinking in the Task Bar

I can confirm, the VPN works when usind RDM 64-Bit. It is a little bit slow when loading the datasource

where do I download it?

wait, there's a 64-Bit version?

How did I get that "expert" tag again? :D

I will try

OK I tried this, but it does not work.

I used these settings:

Executable: C:\Windows\System32\rasdial.exe

Start Arguments: "$HOST$" "$USERNAME$" "$PASSWORD$" /PHONEBOOK:"\path.to\my\network\share\rasphone.pbk"

while Host is actually the name of the VPN in the PBK file.

It also didn't replace the $PASSWORD$ variable, so I entered that manually to test.

I get the same error message, error 720.

I found out it might have to do with WOW64 emulation, as it fails with the same error when I start "C:\WINDOWS\SysWOW64\rasdial.exe".

In Task Manager I see that RDM executes the 32-Bit version of rasdial.exe, regardless if I just write rasdial.exe or "C:\WINDOWS\system32\rasdial.exe"

I guess since RDM is a 32-Bit application, all child processes will be using the 32-Bit WOW64 files as well. And this seems to be broken on Windows 10.

Bottom line: not your problem, Microsoft's problem :)

Still, I don't really want to go back to Windows 8 right now... all the other things I need works great so far.

If you have an idea for a quick fix, please let me know :) I have a workaround (entering ccredentials manually) but in the long run a solution would be great.

Thanks!

Daniel

edited by alphanimal on 10/15/2014

I tested it with "Run as administrator" but it is the same error. Also I'm on 10.0.4.0 now

fyi: the command I see in task manager is something like:

rasdial "VPN Name" "user" "pa$$word" /PHONEBOOK:"\path.to\some\network\folder\rasphone.pbk"

if I type that into cmd, the VPN connects

Hi!

I don't know what broke it (Update to RDM 10 or Update to Windows 10 Preview) but I get this error when trying to connect to any Microsoft VPN:

When I run the "rasdial.exe" command manually, it works, but from withing RDM I get the error.

Any ideas?

I installed the new version of Fortinet SSL-VPN Client, and upon disconnecting the VPN through RDM, I get the following dialog box:

I see in Task Manager that the command executed through RDM was "FortiSSLVPNclient.exe /disconnect" but should be "FortiSSLVPNclient.exe disconnect" I think.

I don't know if this is a change in RDM or the VPN Client (I installed new versions of both on a new machine, on other machines it works fine though)

Thanks!

Daniel

I had Default selected. When I switch to MozNET, it's the same (so I guess that's Default)

If I witch to geckofx it asks for a xulrunner.exe, which I do not have.

where's lblTo = "To"

It either means something like a recipient ("Mail To") or a region ("From ... To").

In German it's either "an" or "bis"

I noticed it's used in the Port Generator boundaries, where it should be translated "bis", but I don't want to break other uses...

In embedded Firefox I get just an empty page. No message whatsoever.

Did you ever look into integrating Chrome? I'd love that.

Thanks!

cool, thanks. I did some German translating recently. Can you update the strings in the release too?

yes, I have writable offline mode enabled. the log contains this message:

[07.06.2014 08:32:43]ERROR SILENT System.Data.SqlClient.SqlException (0x80131904): Netzwerkbezogener oder instanzspezifischer Fehler beim Herstellen einer Verbindung mit SQL Server. Der Server wurde nicht gefunden, oder auf ihn kann nicht zugegriffen werden. Überprüfen Sie, ob der Instanzname richtig ist und ob SQL Server Remoteverbindungen zulässt. (provider: SQL Network Interfaces, error: 26 - Fehler beim Bestimmen des angegebenen Servers/der angegebenen Instanz)

bei System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)

bei System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)

bei System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, Boolean withFailover)

bei System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)

bei System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer timeout)

bei System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)

bei System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)

bei System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)

bei System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnectionPool pool, DbConnection owningObject, DbConnectionOptions options, DbConnectionPoolKey poolKey, DbConnectionOptions userOptions)

bei System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject, DbConnectionOptions userOptions, DbConnectionInternal oldConnection)

bei System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject, DbConnectionOptions userOptions, DbConnectionInternal oldConnection)

bei System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, UInt32 waitForMultipleObjectsTimeout, Boolean allowCreate, Boolean onlyOneCheckConnection, DbConnectionOptions userOptions, DbConnectionInternal& connection)

bei System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal& connection)

bei System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)

bei System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)

bei System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)

bei System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)

bei System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)

bei System.Data.SqlClient.SqlConnection.Open()

bei Devolutions.RemoteDesktopManager.Business.DataSources.DatabaseConnectionDataSource.ExecuteNonQuery(String sql, IDbDataParameter[] parameters)

bei Devolutions.RemoteDesktopManager.Business.DataSources.SQLServerLogSubDataSource.LogConnectionClosed(LogConnectionClosedInfo info)

ClientConnectionId:00000000-0000-0000-0000-000000000000

In the new beta I get this message when using offline mode whenever I try to open, edit etc. a session. Basically on every DB query I think.

I have no problem working though, I just have to click OK from time to time...

Yes indeed it's because of SSL trust.

It's interesting, that it allows me to click "continue" in standalone IE, but not embedded.

Hi!

Sometimes I get this on an embedded session:

I cannot continue in that case, because the link to "load the page anyway" does not show up.

When IE is not embedded, it looks OK:

I hope the German text doesn't throw you off :)

Any ideas?

Thanks!

Daniel

Hi!

I just noticed the same thing with a Web-based login. (Exchange Server 2013)

You have to enter the Domain name within the User field (User@Domain or Domain\User)

I can put the credentials the way they have to be directly in the Web session, but if I use a credential entry that is used for other things, where I need User and Domain separated (RDP), it doesn't work in the Web-based login.

So, just like with vSphere, an option to combine User and Domain into the User field would be handy for Web sessions as well.

Thanks!

Daniel

In, UIResources.resx, where's lblDesktop, lblDesktopProtocol located?

I think those need a fix