Users

All Posts (53)

avatar

ceo_rdm

NoMachine Add-on - Seamless login?

avatar
avatar
avatar

Hi RDMers

I just tried your new NoMachine Add-on (v1.0.0.0).

It works, however it didn't appear to provide a seamless login experience (auto-login). Before I spend time trying to debug this one, I thought I should ask - did you get that working? ie - should it?

I tried both profile stored on disk, as well as profile stored in session.

Thanks

Des

Mac Beta Bug? - Auto Login and Local User Settings

avatar
avatar
avatar
avatar

Hi Benoit

Good work - as always! I love progress!

In this case, however, as I said at the start of this thread, I do use these User Specific Settings for credential entries, so I'll have to wait till you get that working before I can test. :)

Regards

Des

Mac Beta Bug? - Auto Login and Local User Settings

avatar
avatar
avatar
avatar

Thanks guys. Respones :

1) I was trying to get auto-login working with MS RDC - obviously no point trying that anymore till you add that feature...

2) This feature is high-priority for us, as we use it quite a bit.

3) As it happens, this was being caused by number 2) above, so once again fixing 2) is getting more urgent for us.

Thanks

Des

Mac Beta Bug? - Auto Login and Local User Settings

avatar
avatar
avatar
avatar

Hi RDM for Mac Beta Gurus

Having overcome the issues in getting connected to the Data Source correctly, we have now commenced testing of launching connections from RDM Mac Beta (we are currently using v0.9.33.0).

The following things don't appear to be working, and before we waste too much time gathering evidence and steps to reproduce the issue, etc... for you, I thought that it would be smart to simply ask you if these features have even been written into the Mac version yet. Issues are :

1) When launching a plain (ie - direct) RDP session, it works, but we have to type the password manually. When the same session is launched from the PC version, it logs in for us. Should auto-login work on the Mac Beta version yet?

2) Many of our connections use the feature called "Edit Entry (User Specific Settings)" on the PC. On the Mac, this option is greyed out, and the connections that require it to function don't work. Specifically, I have used this on the CREDENTIALS entry, rather than the CONNECTION entry, in case that makes a difference.

3) RDP via Gateway (using Embedded display). These don't work at all - we just get unable to connect 10002 errors

Thanks

Des

Mac Beta Bug - Integrated Security Problem

avatar
avatar
avatar

Benoit

Thanks! That seems to have gotten us over that problem, now we'll get on with the rest of the testing...

Des

Mac Beta Bug - Unable to find MS Remote Desktop

avatar
avatar
avatar

Thanks Richard, that explains it.

Des

Mass Import from CSV File

avatar
avatar
avatar
avatar
avatar

Tom

Good to see a fellow RDM user getting some value from my script - that's why I posted it!

I didn't originally include a sample .csv input file, since I thought the .csv format was so universal that I assumed people would be able to read the code and figure it out. Here are the first two lines of my .csv file :

SchoolNumber,School Name,Salutation,Preferred Name,Surname,Title,StreetAddress 1,StreetSuburb,StreetState,StreetPost Code,Phone Number,Fax Number,Email Address,Web Site,SINA-U,SINA-P

9999,Aquinas College,Mr,Mark,Smith,Principal,58 Mount Henry Road,SALTER POINT,WA,6152,9999 9999,9999 8888,admin@aquinas.wa.edu.au,www.aquinas.wa.edu.au,aquinas,xxxxxx

The location of the file is specified on line 28. My .csv file is in the same folder as the script, so I didn't need to specify a path.

Des

edited by ceo_rdm on 12/9/2013

Mac Beta Bug - Unable to find MS Remote Desktop

avatar
avatar
avatar

Hi Beniot

When we launch an RDP session in RDM Mac Beta, we get the error "Unable to find Microsoft Remote Desktop. Get it from the App" (see screenshot).

I thought that you didn't use the MS RDC Client, but used FreeRDP instead? Also, a locally installed MS RDC Client doesn't seem to fix this error, it appears as though you have to install it from the App store - why should this be necessary?

Thanks

Des

Mac Beta Bug - Array index is out of range

avatar
avatar
avatar

Hi Benoit

Another problem that we've noticed with RDM Mac Beta (0.9.28.0) is an error appearing in RemoteDesktopManager.log - see attached.

Perhaps this is because our DB is so big? We currently have 2,699 entries (according to the dashboard in the Windows version).

Regards

Des

Mac Beta Bug - Integrated Security Problem

avatar
avatar
avatar

Hi Benoit

I noted with excitement that, in this post :

http://forum.devolutions.net/topic8423-unable-to-connect-to-the-database--codepage-.aspx

you mention that since version 0.9.26.0, Integrated Security is now possible with RDM Mac Beta. I was keen to give it a try, so we updated (picked up 0.9.28.0 as of today), and I have a couple of issues to report (sorry!).

Firstly, the connection to the SQL server appears to work nicely using Integrated Auth - see "Data Source Settings.jpg" below for the settings we used, and also "Connection String Debug.jpg" (I must object again about the fact that the password is displayed on-screen in plain text!).

The problem is in the next step, after connecting to the DB, where RDM needs to load the user info. What we get on-screen is in the attached screenshot "Unable to find Integrated User.jpg". The RemoteDesktopManager.log shows :

[4/12/2013 11:52:42 AM]DEBUG Loading user info Zarija Stankovic

[4/12/2013 11:52:56 AM]DEBUG UserInfo not found for Zarija Stankovic

I think I know why this is happening. In RDM, this user appears in the Users list as "CEOWA\Zarija Stankovic", however it appears to be looking for just "Zaria Stankovic". This is wrong, because when you create an integrated user in RDM, it puts this domain name prefix on the start of the username automatically - you can't remove it!

So, I think the fix is easy - just add the domain name as a prefix to the username!

NOW THERE IS A PART 2 TO THIS PROBLEM

In the screenshot, it says "using default security". This appears give Zarija access to RDM entries that he would otherwise not gain access to. In fact, he can see ALL the entries! This is a security hole that needs to be filled!

Thanks

Des

edited by ceo_rdm on 12/3/2013

Mac Beta Bug - Can't connect to SQL Data Source

avatar
avatar
avatar

Hi RDMers

I have fixed this issue. Sorry for the false alarm, but it was an issue that is worth noting. My SQL Server has multiple instances running on it, and when we were configuring the RDM Mac Data Source, I forgot to specify the instance to connect to! It was connecting to one of the other instances instead! (Presumably a default instance...)

So, we solved the problem by putting "fullyqualifiedservername\instancename" into the "Server" configuration field in RDM.

Sorted!

Des

Mac Beta Bug - Can't connect to SQL Data Source

avatar
avatar
avatar

Hi RDM

Well I finally got around to trying RDM Mac Beta! Straight away I ran into a showstopper problem - I can't connect to my SQL Server Data Source. Screenshots attached with all the versions (eg - OS X Mavericks), error messages and log files you will want (all obtained with Debug level 1). Other info you may need :

- We did a "Check for updates" - we were already on the latest version

- We've tried both Integrated Authentication and simple SQL logins - same result

- We can successfully "ping records", so it's not a name resolution or network connectivity problem

- We've also tried the IP address of the server - same result

- On the SQL Server, I don't even see a failed login attempt in the logs - it's as though the client just doesn't attempt to connect at all!

Also, I wanted to mention that it's trivial to force the App to display a plain-text copy of your password on screen. All you need to do is set Debug to 1 and then click "Test Database". Not good. As a minimum - could you replace the password with '*' characters before displaying it?

Thanks

Des

Feature : Browser set via User Specific Settings

avatar
avatar
avatar

Hi wonderous RDMers

My users are asking me, so I thought I would pass on the request to you guys...

It would be nice to be able to set the Web Browser application (ie - choice of : Default, IE, FF, Chrome, Safari) from User Specific Settings, thereby overridding the value set in the connection itself.

I know that we have some control by setting the entries to "Default", thereby picking up the default browser on that PC, however, I am finding that most of us (being true geeky types) use all the different browsers simultaneously, and we all have different preferences for which sites we open in which.

Easy fix?

Thanks

Des

New-RDM-Session for type "Contact"

avatar
avatar
avatar
avatar

Smashin' it! You guys ROCK!

Cheers

Des

New-RDM-Session for type "Contact"

avatar
avatar
avatar
avatar

Hi RDMers

Would it be possible to add functionality to the PowerShell command "New-RDM-Session" to allow the addition of entries of type "Contact", please?

Thanks

Des

New v9 Enhancement Request - Contact Entry Types

avatar
avatar
avatar

Hi David

I have just packaged and deployed 9.0.1 to all my users - thanks so much for getting this version out so quickly - everybody here is loving it!

With regards to the Refactoring of Contact details, I have just been using that to convert our Data entries to Contact entries - nice - very good - thanks! A couple of things, however (sorry) :

1) I think the Phone field should go into the "Work phone" field in the Contact, not the "Home phone" as it does presently. Given that RDM is typically used in corporate environments, I figure this makes more sense.

2) If the First name and Last name fields are blank - it just creates an entry without a name - might be work adding a couple of quick "integrity checks" on the entry being converted to make sure the resulting entry isn't just rubbish.

3) The logic which greys out the "Refactoring > Contact" icon in the ribbon bar is faulty. If you use the Navigation pane to select the entry - it seems to work fine, HOWEVER, at first I was trying to select the entries from within the Dashboard, and found that if there were multiple entries listed, it would allow me to convert the first one to type Contact, but then the icon would grey-out and stay greyed-out for all the others! There are 2 easy workarounds to this bug (either work exclusively from the Navigation pane, or use Search/Filter to find the entry you want), but it buggy enough that I thought I should report it.

Thanks for an otherwise EXCELLENT feature!

Des

Possible v9 Bug - Phantom Entry/Caching Issue

avatar
avatar
avatar

Stefane - Thanks for your thourough replies - all great info!

Des

9.0: edit sub connections cache problem

avatar
avatar
avatar
avatar

A complete rebuild of the cache indeed works around the issue. Thanks for the advice.

Your welcome!

:)

Des

RDM server proxy

avatar
avatar
avatar
avatar
avatar

My 2c (for what it's worth).

I have also sought this feature, both in a previous job and this one. I did find at least one competitor product that was able to act as a proxy for both RDP and Putty settings, but the implementation was awful and didn't even come within a horses' gallop of what RDM can offer.

In the end I have solved this by building full Microsoft Remote Desktop Gateway servers to act as the proxy. Yes, there is a cost to this solution, and Yes, there are licensing implications with this solution, but assuming you can overcome both of those, it works great. RDM's ability to integrate with an RD Gateway is fantastic, just as good as it's ability to do direct RDP connections. (One small piece of advice, though, is that RD Gateway sessions work better is you set the Display type to "Embedded" - see http://forum.devolutions.net/topic2545-credentials-for-rd-gateway--not-working.aspx).

For non-RDP connections, I have used another MS solution - port proxies. A full explanation of this is a bit out-of-scope of this post, but the short version is that I ran the following command on the "proxy" server :

netsh interface portproxy add v4tov4 listenport=2083 connectaddress=192.168.24.252 connectport=80 listenaddress=192.168.4.219 protocol=tcp

And then configured RDP to connect to the proxy server on port 2083. The portproxy then forwards the traffic to the destination on the other side.

Des

9.0: edit sub connections cache problem

avatar
avatar
avatar
avatar

Hi lunarg

I reported a similar problem with caching a couple of days ago - see http://forum.devolutions.net/topic7319-possible-v-bug--phantom-entrycaching-issue.aspx.

While the whiz-kids at Devolutions work on fixing the caching problem in the next version, the best advice I can give you comes from Stefane, which is to try using "CTRL + refresh" to fully rebuild the local cache. Note that this is NOT just a case of pressing CTRL+F5 - you have to hold CTRL on the keyboard while clicking on the refresh icon (see image below).

Regards

Des

Small v9 Bug - Allow Multiple Connections

avatar
avatar
avatar
avatar

This is one issue that I have to fix in the batch edit.

Sorry, I don't follow. Do you mean "A simple batch edit of the affected connections should allow you to set the Allow Open Multiple Connections option, however editing that particular property isn't currently a feature of Batch Edit. In the future, we intend to add it to Batch Edit, which will provide you with a reasonable workaround to the problem." ??

I was looking at writing a PowerShell script to fix the affected entries myself, but unfortunately, it doesn't seem to work. If my dectective work has been accurate, the property used to be called "MetaInformation\AllowMultipleConnectionPerSession", but is now called "MetaInformation\AllowMultipleConnections". I was hoping that PowerShell would have read/write access to both of these at the same time, allowing me to create a loop that fixed all my connections, but it seems that since I've upgraded to v9, my PowerShell only sees the later, no the former.

Oh well, enough time spent on this one - drop it, I say! :)

Cheers

Des

Small v9 Bug - Allow Multiple Connections

avatar
avatar
avatar
avatar

Hi RDM Support

Another v9 "artefact" to look at...

The way that the option "Allow open multiple connections" works has changed. Prior to version 9, it was a simple check-box (AllowMultiplePrevious.jpg). In version 9, this has been upgraded to a drop-down list (AllowMultipleV9.jpg).

I see the point of having the three options "Default", "True", "False" - don't get me wrong - I like it.

But the problem is, on the previous version (8.4.6.0), I had configured hundreds (but NOT ALL) of our Putty sessions to TICK this box to ALLOW multiple opens. Now that I've upgraded to v9, all these connections have reverted to a state of "Default". Now I know that I could change my Options so that my default setting is to "Allow" multiples (under File > Options > General), but the problem with that approach is that it would FIX all the sessions that were checked previously, but it would BREAK all the sessions that weren't (ie - it would allow multiple opens that previously weren't allowed).

Since there are so many connections that I had put a TICK in the box, is there a way to update (eg - via direct SQL) all those entries to set the new variable to "True"?

Guys - I can handle this manually if required, so please don't spend more than 5 minutes thinking about this one - if there's an easy way - let me know - otherwise I'll live with it!

Thanks

Des

Possible v9 Bug - Tree Icons

avatar
avatar
avatar

Hi,

This is now fixed as well.

I have tested this using the updated binaries as per http://forum.devolutions.net/topic7322-new-v-enhancement-request--contact-entry-types.aspx, and I can confirm that it works great - thanks!

Des

Possible v9 Bug - Tree Collapse

avatar
avatar
avatar

This issue is now fixed internally. Thank you very much for the bug report

I have tested this using the updated binaries as per http://forum.devolutions.net/topic7322-new-v-enhancement-request--contact-entry-types.aspx, and I can confirm that it works great - thanks!

ie - "Include root in collapse all" now works perfectly, and the "Collapse tree view on clear filter" honors the "Include root in collapse all" setting - PERFECT!

Des

Small v9 Bug - Contact Display

avatar
avatar
avatar

This is now fixed.

I have tested this using the updated binaries as per http://forum.devolutions.net/topic7322-new-v-enhancement-request--contact-entry-types.aspx, and I can confirm that it works great - thanks!

Des

1 - 25 of 53 items