(user deleted)
Out of sync warning
Hello,
I'm not following. What would be the necessary right and how would this be configured for this account to be able to reset the flag in DVLS?
Regards,
Simon
Hello,
Could you please verify if the account has the necessary rights to use WinRM (Windows Remote Management) to the domain?
Best regards,
Log enhancements for real-time analysis
Are there any plans for enriching the server-side application logs with more records? Trying to do non-forensic analysis with Azure Sentinel or any other tool is impossible with the logs provided by DVLS. What would make the log more friendly is als getting the name resolution of UserID, FolderID, etc
Below is a sample of a typical PAM log entry
PAM - Message: Check-out active. Varaktighet: 18h00. , MessageType: 99-Check-out active, SubMessageType: MessageContent: {"duration":1080} CredentialID: 1b93e7f5-fa72-4791-9479-41e9cdd8b566, FolderID: 1b93e7f5-fa72-4791-9479-41e9cdd8b566, CheckoutID: 6ca430ce-c90a-4bd4-871c-22637eff32c9, ResetPasswordScheduleID: , TagID: , UserID: d02ee09f-a172-4081-ab73-dad3770227d7, DateTime: 2024-05-29 13:42:45, Username: rdm-user@contoso.com, CheckoutPolicyID: , OtpTemplateID:PAM Provider maintenance mode and granular disabling of heartbeat failure notifications
Hello,
I'd like to chime in here, we are also looking for a way to disable heartbeat notifications. Not the same scenario though, in our case we are bulk importing personal accounts over a Domain User provider, but we don't reset the passwords until first use by that user. This causes a lot of unnecessary log entries and e-mail notifications being sent out do admins, since the accounts are technically out-of-sync.
(We don't want to manually reset these during import because the users are still using the current password which is stored in their user vault, and they haven't created a DVLS Privileged Account entry yet.)
Regards,
Simon
Out of sync warning
Hi,
It's the same domain service account on both.
Regards,
Simon
Hello,
I'm sorry for the delay, and I thank you for your patience.
Could you verify the account that is configured on your Application pool and the Scheduler service? Are they domain account or local/network service account?
Best regards,
Out of sync warning
Certainly, we are at DVLS version 2023.3.13.0 and we are using Domain User provider.
It's the same issue when using check-in in the web gui, but not as big of a deal since the workaround mentioned is more easily available.
Out of sync warning
Out of sync warning (PAM tab) is still active upon successful password reset (via check-in). The only way seems to be to go into web PAM GUI and do a Check Synchronization Status or Password Reset.
More integration with PAM
Hello,
There are some features in PAM (web) that we are missing from RDM GUI (PAM tab)
Reset password
Check Synchronization Status
When opening a connection that uses a PAM account, a check-out request windows is launched. Having the option to launch a check-in windows upon disconnect would also be a useful feature.
Regards,
Simon
Support custom attributes in PAM import
Hi,
Is this something that could be included in a future release? :)
Regards,
Simon
Delete of multiple accounts from a PAM vault
Deleting multiple accounts from PAM vaults is currently not possible from either RDM or the web GUI.
From RDM, multiple selection is possible but there is no delete function. In the web GUI, multiple selection is not possible
Being able to do this, granted you have the permissions, I think would be an important addition
Regards,
Simon
Schedule import to PAM vault
Thank you, issue resolved :)
Regards,
Simon
Hello,
Thank you for your request. We don't have plan to import automatically PAM account after a scan, but I'm taking note of your request. It is possible to import PAM Account from scan results via our PS module, here are some commands that could be useful : Get-DSPamScanConfiguration, Get-DSPamScanResult, Import-DSPamScanResult. It is not possible to launch the scan from the PS module though. Let us know if it is something that could be useful for you.
Best regards,
Support custom attributes in PAM import
Hi,
Ok fair enough. I've talked this over with my team and reached the following understanding. The feature to skip disabled accounts during scan, import or when we set permissions isn't really critical for us. We can build our own mechanism to skip these with a scripted approach, as long as they can be identified in the scan results.
What bring me to the next point, which is that the ms-DS-User-Account-Disabled attribute is not included in the scan results. What we also would like, going back to the original request, is being able to define at least one custom attributes (e.g. otherPager, in our case) that could also be included in the scan results.
Regards,
Simon
Hi Simon,
Other customers want us to ENABLE/DISABLE the accounts as part of the checkout process, I'd prefer to properly manage the situation and say that password validation cannot be performed.
For sure, we'd prefer for the PAM is considered the Single Source Of Truth, and maybe we have a skew to design features that way. We will for sure work in that area. We cannot have a kind of backdoor attack when a malicious actor creates a disabled account and its completely ignored by our tools.
Support custom attributes in PAM import
Hello,
Well both since the features aren't mutually exclusive imo. First off, it would be nice to have the option to exclude disabled accounts during scan. Since I suspect this feature might be on low demand from customers and require GUI changes, it might now get much attention. Improving the error message would be another way to "catch" this issue, but not as good since it isn't preventive. This speaks perhaps to a broader customer base since accounts can be disabled post-import, and this doesn't require any changes in the GUI.
I hope my English makes sense.
Best Regards.
Simon
Hello Simon,
Thank you for your feedback. Just to be sure, what you would like is to improve the error message to inform the user that it failed because the account is disabled or you would like to see in the account list if an account is disabled on the provider ? Improving the message should be something possible, we could investigate if we could catch that situation and improve it.
Best regards,
Support custom attributes in PAM import
Thank you. I understand that this might only be an issue in deployments with large batch imports of accounts. Another related function that might be considered more useful would be if the Check sync status and Reset password would tell the user if the account was disabled. Today they throw an ambiguous error and becomes out of sync. Thanks!

Hello Simon,
Thank you for your suggestion. I'm taking note of your last request, we will see what could be done.
Best regards,
Support custom attributes in PAM import
Hello Simon,
Thank you for your answer. I understand your need, we will see what could be done.
Best regards,
Hello again,
In addition to this, it would be nice to have the option to exclude disabled accounts from being imported into the PAM vaults.
Regards,
Simon
Schedule import to PAM vault
Hello,
It is possible to schedule provider scans, but are there any plan on also scheduling imports of accounts to PAM vaults?
We could solve the scheduling ourselves if there were any powershell cmdlets for scan and import to PAM vaults, but I couldn't really find any in the PS module.
Regards,
Simon
Support custom attributes in PAM import
Hello Simon,
Thank you for your suggestion. I assume here that you would like to have more attribute for Active Directory Provider. Am I right ? The attribute that you would like to import, would you like them in a read-only mode or would you like to be able to edit them ? If it can help, as mentionned by another user in previous message, you can get more attributes with AnyIdentity provider. They are not updated for now, we have to work on that, but you can get all attributes that you want. I'm taking note of your feedback and will see what could be done.
Best regards,
Hello,
Yes. We would like to import the attribute otherPager as read-only. I understand that this attribute is not very interesting for most customers, that why specifying custom would do.
Regards,
Simon
Support custom attributes in PAM import
Hello,
When importing PAM accounts, a pre-defined and limited set of attributes are imported from the domain provider. Would it be possible to release either "import templates" or perhaps a way to edit what is included in the standard import of PAM accounts?
Regards,
Simon

More granular PAM Vault permissions
Hello,
Yes, that would benefit us, we would use VIEWER as the default permission of our PAM vaults and then proceed with
assigning exclusive OPERATOR to individuals without risking any unauthorized inherited usage permissions post-import.
When would this new feature be added?
Regards,
Simon
Hello Simon,
I've had a discussion, and we now believe that a minimal role, limited to listing items, would be appropriate. Currently, in RDM/DVLS, accessing anything in a vault require having access to the vault itself. This is the standard operation, and we prefer to maintain it to avoid inconsistencies between shared and PAM vaults. We suggest creating a "Viewer" role that is restricted to listing items. This role would be similar to the existing Log Reader role, but with a key difference: the Viewer role wouldn't have access to read logs. Have you tried using the Log Reader role to see if it meets your requirements?
If it's beneficial, we could add a viewer role with exclusive listing capabilities. This access could be granted to users at vault level with specific roles assigned within each account. Would this approach be helpful to you?
Best regards,
More granular PAM Vault permissions
Hello,
Yeah, you would want a vault visibility attribute rather than a permission tied to roles, in my opinion. I consider the vault itself it's just a container, with a set of permissions which sole purpose is to be inherited down to any PA in that vault. So basically just another folder from a system point of view, for the sake of distributing permissions to it's respective content.
What I meant was that the PA:s that you have permissions to use are already "visible" on the account level, so nothing would technically be inherited from the vault if you were to introduce a new vault LIST permission or whatever, which makes this odd considering how the rest of the permissions work. Which brings me back to my point above that it's more similar to the "Hidden" folder attribute in Windows, rather than "List (all) folder content". At least that is how I interpret the behavior when browsing from vault entries, but not when using any PAM features directly which I still think should be treated as a bug :)
Anyways, kudos for looking into this
Regards,
Simon
More granular PAM Vault permissions
Hello,
Thank you for the Log Reader role tip.
We did some more investigations. Apparently, you CAN, without having any vault permission WHILE having PA permissions, browse the PAM vaults to find your assigned accounts when creating a new DVLS Privileged Credential entry. The PAM vaults become visible if they contain PA:s that you have permission to use. However, the PAM vaults are NOT visible in the PAM tab or when using DVLS web GUI, so you can't check in your PA, rotate password etc. Check-out requests seems to be integrated though, but the rest isn't really available outside the PAM tab. Maybe we should just call this visibility issue bug and not to have to wait for a new feature :-P
With that being said I have to disqualify my earlier suggestions, any new LIST permission wouldn't be technically "inherited down to the PA:s", since you obviously can list your assigned PA:s once you can list the vault. And it wouldn't make much sense adding a LIST permission of PA:s you can't use or adding a new type of vault-only permission, considering how permission is designed in general. So I think the most straight forward, and simple solution would be that the PAM vault becomes visible to users that have permission on any PA in the PAM vault in question, aligned with how it works when creating new entries.
I've also thought through regarding control over inheritance, perhaps some kind of "Disable inheritance" option being available when importing accounts or on the vaults itself, but it would mess up the current permission architecture. Sorry for getting into solution mode.
Regards,
Simon
More granular PAM Vault permissions
Hello,
Yes, we have a setup with personal PA:s and with the READER role being inherited from the PAM vault to all newly imported personal PA:s is a problem for us. We also tried removing READER on the PAM vault but that makes the vault invisible and prevents the user from using his PA even if he has READER on the PA itself.
As I see it there are two viable solutions. Either a new ROLE that gives permission to connect to a vault or list all PA in a PAM vault, without being able to use the PA.
Or more control over inheritance, for example to disable it. Giving us the ability to have READER role on the vault, but prevents this being the default permission on all imported personal PA:s.
Regards,
Simon
More granular PAM Vault permissions
Hello,
Our use case consists of personal administrative accounts inside one PAM vault per customer environment. Out-of-the-box, whenever READER permission is given to a user in a PAM vault, they can use all accounts in that PAM vault since the permission is inherited on to the PAM accounts by default. All individual PAM accounts need to be edited post-import to remove inheritance to prevent existing vault users from being able to use each others personal administrative accounts. However, we also have some shared non-personal "group accounts" that are used by different vault users, which I think is the scenario your PAM product is more aimed at solving.
We would like a new feature for either giving us the ability to change the default PAM vault permissions, that would affect newly imported accounts OR if you could add a new vault role with the ability to either just see the PAM vault itself (which is required for using any of his/hers personal vault accounts) or perhaps only LIST the content of a vault instead of actually being able to use all the accounts.
We understand that we would still need to sort out the task of assigning each vault user to his/hers personal PAM account inside each PAM vault.
Retrieve secrets from vault
Hello,
Does DLVS have any features for pushing secrets to external vaults (e.g. Azure Key Vault) or do devops usually reach into DLVS to retrieve/update secrets through a Rest API?
Regards,
Simon
Export formats that supports scripting of new accounts (multi-domain env)
Hello,
Thank you.
When adding several domain providers in PAM, does these count as data sources in the licensing model, or into multi-domain authentication (only in Platinum)?
data-DevolutionsServer-2022 (windows.net)
Best Regards,
Simon
Export formats that supports scripting of new accounts (multi-domain env)
Hi again,
After looking at the picture and the arrows, I also need to ask if the user actually lands on a desktop on the Gateway server, or is just pass through to the endpoints seamlessly?