Feature Request

Feature Request

Feature request forum for Devolutions PAM

Newest

Most active

Most votes

avatar

rbruni

PAM with Devolution Workspace

I would like to know if Devolution Workspace will be able to checkout credentials from a PAM Vault.

1

36

6

avatar

rbruni

avatar

jh1

MSSQL PAM Provider Gateway Support

as we are currently switching PAM providers from connection through application server to a connection using a gateway it would complete our design when the MSSQL PAM provider could be configured with a gateway connection, too. As of now we can use it for AD Authentication (login), PAM AD/local Windows/SSH provider but not for our ~100 MSSQL servers which also have uniquie local sysadmins per User Would be helpful to get the function that we can also route PAM provider MSSQL connection through a gateway server too Custom PAM provider is not an option for us, as the environment ist pretty much hardened and resticted and we cannot simply use remote powershell without interuptions

1

53

2

avatar

jh1

avatar

markusburkhardt

Assigning JIT-permission sets to PAM credentials from PAM vault context, if you have permissions on the corresponding PAM provider

Good morning Devolutions community, i am currently in the process of integrating the PAM module in our DVLS/RDM structure and i belive the current way of assiging JIT-permissions sets to PAM credentials cound use some improvement - QoL-wise. Currently you have to switch from the PAM vault to the PAM provider configuration to assign the a PAM privilege set to the account and then switch back to the PAM vault to set the default groups of the PAM privilege set on the specific account. It whould be more comfortable if you can do that directly from PAM credentials, of course only if you of sufficient permissions within the PAM provider to do so. I am currently running RDM 2026.3.16.0 with DVLS 2026.3.13.0. Please take a look at this an let me know if you need further information. Best regards, Markus

1

37

2

avatar

markusburkhardt

avatar

markusburkhardt

bulk edit for PAM credentials in DVLS/RDM

Good morning Devolutions community, i am currently in the process of integrating the PAM module in our DVLS/RDM structure and currenty i have to create a lot of PAM credentials, because our concept requires one PAM credential per role per user. So i am ending up with 120+ PAM credentials total devided into three categories. As the PAM admin it whould help me a lot if you can get the bulk edit feature like on regular entries for those entry types. Most repetative is currently setting the account lifecycle policy, checkout policy and the basic entry setting (picture, tags, ...), since i am unable to work with inheritance due to the permission constraints within the PAM vault. I am currently running RDM 2026.3.16.0 with DVLS 2026.3.13.0. Please take a look at this an let me know if you need further information. Best regards, Markus

2

37

1

avatar

Luc Fauvel

avatar

markusburkhardt

PAM logs - Within RDM you cant see checkout comment and ticket number

Good morning Devolutions community, i am currently in the process of integrating the PAM module in our DVLS/RDM structure and i am missing the ability to show the checkout comment and/or ticketnumber in the logs of the PAM credentials within RDM.  [image] The logs are available in the DVLS web UI so this is a low priority feature request for a bit more QoL. I am currently running RDM 2026.3.16.0 with DVLS 2026.3.13.0. Please take a look at this an let me know if you need further information. Best regards, Markus

1

47

1

avatar

Luc Fauvel

avatar

elaineberenguer

"Grant Checkout" option do DVLS Privileged Account Entry

Currently, grant check-out is available only to PAM accounts. It would be nice if we have the ability to grant checkout DVLS Privileged Accounts as well. In the RDM UI, this entry shows a more friendly check-out status and we're missing this 'feature' because we only use grant checkout in this vault: DVLS Privileged Accounts: [image] PAM Accounts: [image] Regards, Elaine Berenguer

1

75

2

avatar

elaineberenguer

avatar

freddy1

Report filter on JIT and add this to scheduled report in separate colomn.

In the web-interface I can see the PAM-logs (ReportsPrivileged access - Logs). The problem is that there are couple of colloms to filter, for examle Name, PAM Vaults, users and actions. When I wan't to see JIT action the only way is to open an entry. Then I a message and the reason. In the message there is a Elevated as: entry. Message: Check out requested by user:xxx@yy.com. Duration: 8h00. Reason: test logging. Elevated as: Domain Admins. Reason: test logging Is it possible to: add a filter on "Elevated as". That way it's easy to analyse the JIT elvation. Add "Elevated as" in a separate collum in the scheduled report "privileged access-recent activitties" so I can easy analyse the information in Excel.

1

568

4

avatar

Gabriel Raymond-Plourde

avatar

Yoffstr

Windows server local accounts - Password rotation via devolutions agent

hi guys, instead of the current custom template for windows password rotation on local accounts. Instead of using powershell to do thee rotation, can we get it to work with the devolutions agent?

3

157

9

avatar

Yoffstr

avatar

alexmoney

Ability to use Privilege Account when using SQL Management Studio Add In

You can currently using the 'My Privilege Account' option only when using the Windows Integrated Elevation, whilst this would be improved by allowing the 'Privilege Account' option. The main issue is you can't currently automatically use a database account to login, thus meaning the password must be made visible during checkout to be manually supplied to the client.

2

165

5

avatar

alexmoney

avatar

alexmoney

Ability to Report on JIT Assignments

Whilst JIT is great it moves the availability of the data that is needed to perform privilege access reviews in to Devolutions Server and this is not easy to surface. The ideal will be to make this data available via API so that our IGA platform can surface who has access to elevate in to which privileged groups, if this was not easily possible, some form of report that surfaces this data that could be extracted and imported in to the IGA would be ideal.

1

128

3

avatar

Luc Fauvel

avatar

jol

Extend check out and see when automatic check in will happen

It will be nice on pam/jit accounts to get the possibility in RDM to extend a checkout if fx a technician have check out the account for 4 hours and the task is taking longer then it sould be possible to extend the check out so the account is not deleted in the AD and also it will be nice with the possibility to have a counter or possibility to see when auto check in will happen.

3

382

5

avatar

alexmoney

avatar

sisufaj

Ability to add Pam entries in User vaults

Right now, storing privileged credentials requires creating a separate, dedicated "high" level vault for each user, on top of the regular user vault they already have. Being able to add PAM entries directly into the existing user vault would eliminate that duplication — no need to provision, name, and maintain a second vault per person just to hold their privileged accounts. It also reduces ongoing admin overhead. Every time someone new needs privileged access, instead of standing up a brand-new vault and re-applying visibility, checkout, and rotation policies to it, the entries could simply be added to a vault that's already configured correctly. Fewer vaults overall also means less to audit and license-track, since policy sets wouldn't need to be duplicated across near-identical objects.

3

95

1

avatar

Luc Fauvel

avatar

fischere

Ability to export PAM checkout logs

We need the ability to export the PAM logs found here: Administration -> Privileged access -> Check out requests While there are logs on account entries and connection entries, the logs found here provide a uniquely useful view.

1

85

1

avatar

Luc Fauvel

avatar

jonathan2

Implemented

Disable or enable M365 accounts with JIT Provisioning

Could just-in-time (JIT) provisioning make an M365 account active when needed? At checkout, the system reactivates the M365 account and adds it to a group with administrator rights, which is automatically deactivated upon check-in.

1

354

3

avatar

Maxim Robert

avatar

Christian Egli

Shared PAM Account Pool for Service Groups

We manage multiple services that consist of server groups. For example, the "File" service contains approximately 30 servers . Access to each server is controlled through an Active Directory security group, which includes all authorized users, including those managed through Devolutions PAM . Currently, a dedicated PAM account must be assigned to each server, resulting in a large number of privileged accounts that need to be created, managed, and maintained. However, in our environment, there are never more than three administrators working concurrently across the servers of the same service group. Therefore, maintaining 30 separate PAM accounts provides little operational value. We would like to request a Shared PAM Account Pool feature for service groups. Instead of assigning a dedicated PAM account to every server, a configurable pool of accounts could be shared across all servers within a service group. In this example, a pool of three PAM accounts would be sufficient for all 30 file servers . When an administrator requests access to a server within the service group, an available PAM account would be automatically allocated from the pool. Once the session is completed and the account is checked back in, it becomes available for the next administrator. Important: A Just-In-Time (JIT) approach that creates a new account on demand and deletes it after use is not a suitable alternative in our environment. The required waiting time for Active Directory replication can introduce delays and negatively impact operational efficiency. We require immediately available privileged accounts without dependency on AD replication timing. Benefits Significant reduction in the number of PAM accounts that must be managed. Lower administrative overhead. Faster onboarding of new servers into existing service groups. Improved scalability for large environments. Better alignment between the number of PAM accounts and the actual number of concurrent administrators. No delays caused by AD replication as can occur with JIT-created accounts. This feature would provide a practical and efficient solution for organizations where servers are managed in service-based groups and concurrent administrative usage is considerably lower than the total number of managed systems.

2

144

7

avatar

Luc Fauvel

avatar

Erica Poirier

Multiple DC for a Domain provider

Hello, Customer request From the following forum thread . The problem was with the (7) - the Domain "testdomain.local" has 3 domain controllers (dc1.testdomain.local, dc2...) and I used "testdomain.local" as DC. The domain itself is not part of the SPNs for the DCs which caused the problem. After switching to a single DC the rotation and the heartbeat worked. Is it possible to configure multiple DCs for heartbeat/password rotation? Best wishes,

1

125

0

avatar

alexmoney

Ability to use Privilege Accounts in the Active Directory Plugiin

Currently the addin does not support My Privilege Account or Privilege Account Functionality, limiting our ability to use over multiple disparate domains

2

141

5

avatar

alexmoney

avatar

markusburkhardt

Make managed accounts with JIT-priviledge elevation able to get disabled in Active Directory when unused

Hello Devolution-community, my company is currently testing the PAM-module of the DVLS and the experience so far was great. In an discussuion about the implementation we came up with the question if it wouldn`t be better to keep currently unused (checked-in PAM-credentials in form of persistant AD-accounts) also deactivated in Active Directory? Whould it be possible to add an configuration option within the Account lifecycle policies of the PAM-module in DVLS? Our currently used PAM-system from an competitor is able to do just that and i belive securitywise that this would be good improvement for your product. Let me know how you think about that, Best regards, Markus

2

163

4

avatar

Luc Fauvel

avatar

alexmoney

Ability to Skip TLS Certificate Validation Before adding a Subscan

You cannot turn this option on before attempting to onboard servers via an AD discovery scan, so the addition will fail. You have the ability to turn it on only if adding an account manually, makes sense to give it when performing a sub scan.

1

129

1

avatar

Luc Fauvel

avatar

Christian Egli

Pre-selected AD group for JIT elevation based on custom value

Hello, We are currently in the pilot integration phase of RDM with our customers. The feedback so far has been very positive. The only drawback is that selecting the JiT group is quite complicated. At the moment, it is necessary to check which role the server or session belongs to and then manually search for the corresponding group in the JiT selection window. This process is time-consuming and inconvenient. A potential improvement could be the use of a custom attribute : the AD group to which the server belongs could be stored in a custom field. When opening a session, the user would automatically be assigned to the stored AD group in the background. [image] Could you please let us know if such a feature is planned or already under development? Kind regards, Christian

1

361

6

avatar

Christian Egli

avatar

Christian Egli

Session-Specific JiT Privilege Selection via Drop-Down Menu

Starting with version 2026.2, it is possible to assign a "Default JiT privilege" to a PAM account. We would like to request an enhancement to configure this privilege on a per-session basis. Specifically, we need a drop-down menu within the session configuration that displays and lets users select from the available privileges assigned to the inherited user. [image] This scenario is necessary when multiple sessions are linked to the same account, but each individual session requires a different "Default JiT privilege". Best regards, Christian

1

198

1

avatar

Luc Fauvel

avatar

cyrillschreiber

Automatic Update of Date Portion (Month & Year) in Passwords

Currently, passwords stored in Devolutions can be updated manually or fully rotated. In our environment, we have a specific requirement where only the date portion of a password (month and year) should be automatically updated , while the rest of the password remains unchanged. Requested Functionality Ability to automatically update only the month and year within a password. The remaining part of the password should stay static. The update should be configurable (e.g., monthly or yearly). Ideally, this could be implemented via: Password templates with date variables (MM/YYYY or similar), or A built-in rule for partial password rotation. Use Case We manage multiple service accounts and application credentials where the password format follows a predefined structure, for example: AppName!MMYY Example password: Current password: FinanceApp!0626 Next automatic update: FinanceApp!0726

1

244

5

avatar

David Hervieux

avatar

freddy1

Implemented

Default PAM JIT group assingment

We use JIT (Just-In-Time) access for temporary Domain Admin , Schema Admin , and Enterprise Admin rights. This works well, as these elevated rights are only needed occasionally. It's not an issue for users to manually check the checkbox when these rights are required. In the future, we plan to add our ServerOperators group to JIT as well, since this group is necessary for the daily work of our system administrators. Question: Is it possible to automatically assign a group (right) when a user checks out an account via PAM? Use case: User-X does not have any special group memberships by default, only Domain Users . User-X checks out an account via PAM. JIT automatically assigns a group (e.g., ServerOperators ) without requiring the user to manually select it during checkout—ideally, the group is pre-selected by default. Rationale: The idea is that the account should function as a normal user by default. For example, the user works only 2 days abd need elevated permissions (e.g., ServerOperators) two days per week. During the remaining days, if the account were to be compromised, it would only have standard user rights (Domain Users), thus reducing the attack surface. [image]

4

618

8

avatar

freddy1

avatar

hjbos

JIT Domain admin rights and login to Active Directory Controller

We have implemented JIT to grant domain admin rights to a select group of our administrators for their privileged account . This right is needed to make a RDP session to a domain controller. At the moment you complete the JIT process to get domain admin rights the privileged account in Devolutions don't have the group claim and you need to restart RDM to get this claim. In my opinion this is not how this should work.

0

1283

27

avatar

Marc-André Moreau

avatar

bryan_ricciardo

Feature Request - Powershell/API/Ansible support for onboarding Linux SSH Providers

We would like full PowerShell/API/Ansible support for automating Devolutions PAM Linux SSH onboarding. Use case: We manage a large Linux/Unix fleet and need to onboard many Linux SSH PAM providers and managed credentials programmatically. Today this appears to require manual UI steps or incomplete/undocumented automation. Requested capabilities: 1. Create a standalone PAM credential programmatically. - Username - Password or generated secret - Vault/folder placement - Checkout policy / permissions where applicable 2. Create a Linux SSH PAM Provider programmatically. - Provider name - Host/FQDN/IP - Port - Timeout - Credential mode - Heartbeat verification mode - Credential type linked credential - Link the provider to an existing standalone PAM credential 3. Create Linux SSH managed credentials/accounts programmatically using that provider. - Account username - Provider association - Vault/folder placement - Checkout policy - Password rotation policy - Heartbeat settings Business reason: This is needed for enterprise-scale PAM onboarding, CI/CD-style provisioning, ansible automated PAM deployment for new systems, repeatable Dev/Test/Prod environments, and compliance-driven infrastructure-as-code workflows. Without this, Linux SSH PAM onboarding is difficult to standardize and audit at scale.

1

219

2

avatar

bryan_ricciardo

1 - 25 of 71 items