skor

Yes, inside the dashboard.

Hi,

Please change the website features to the same features as the old legacy one.

The "new" website lacks "copy username" and "copy password" in the GUI on Mac.

Sorry, I only had the screenshot.

No RDM crash.

See picture:

Nothing in the logs for this weekend.

I missed all items in some vaults.

1. Just tested. Now it worked?? (after a too long timeout) Maybe because I stopped the program, pull-out the cable, start the program?

Normally I don't close the program. I put the mac in sleep...

I don't trust it. I'm sure I browsed through all the vaults before the weekend and during the weekend, at home, it didn't worked. Even after restart. The items were not there.

2. Dropbox datasource crashed (exception failure) when I tried to switch to it without cable.

Hi,

Yes, 100% sure I did that.

The first time I tested I realized that I possibly did not opened all the vaults.

Therefore, for the weekend, I browsed through all the vaults on the mac.

At home however, the items where not there.

Even worse, when I took a certain vault the items of the previous vault were shown not the correct ones.

But also; It must detect automatically all the changes, even I never used them before.

How could I otherwise keep track of it all? this is impossible to follow and would take to much work.

Hi,

I use RDM 2019.1.7.0 with a SQL server datasource.

I mostly work in my windows environment.

If I want to use RDM at home I'm not connected to the company network so I don't have a SQL connection.

In windows all my items keep on working in offline mode.

On Mac however, only a few, from 1 vault, are there.

So on Mac not ALL the items, in ALL vaults are offline available.

When I'm offline I miss almost everything.

I even, when I was connected, browsed through all my vaults so make sure that the program sees all the entries.

But, at home, he misses vaults and/or items.

So, please make sure all my items(in all vaults) are available when I'm offline.

Korstiaan

Thanks!

Hi,

1. Does not make a difference. Does not help.

2. Same issue here. Does not help. (is also undocked mode)

I created a Deprecated Putty and this one is ok.

I added a movie to see it.

First test is open the session via the Action menu -> OK

Second one is double click on a Putty session -> OK

Third one is the problem one, opened with a double click. -> NOK

Hi,

If you add an item as a favorite it is difficult to see in the favorites screen from where it is...

Adding a host column does not help because it does not takes the value behind the variable.

The detail screen on the right hand DOES it.

Why do not show this as well in the column?

See screenshot

This the item.

This does not happen with other types.

How can I test with another SSH (putty)?

Hi,

It's putty I think.

Is it the one that is defined in Options -> Type -> Putty ?

There is is Putty.

And it is called undocked and External is not there???

Maybe that's the problem?

All the other items are on external and there I don't have this issue.

The +-sign worked once in the beginning and now never again.

It appears at the end, if I release my mouse...

Hi,

It is called "Allow password in variable" that I see as administrator and not "allow reveal password" ?

Hi,

In my private vault I have a credential and there, AS AN ADMINISTRATOR, I see under the Advanced Menu -> Miscellaneous topic a checkbox: Allow password in variable.

I need to set true or otherwise the item would not work for me either.

A non-administrator does NOT have this option available if he makes a credential.

The item itself point to Private Vault Search : ilo physical.

And has arguments:

-addr $COMPUTER_NAME$-ilo -name $USERNAME$ -password $PASSWORD$

This works for me as administrator but not for a normal user. $USERNAME$ works, $PASSWORD$ does not.

Seems normal because the non-administrator does not have the advanced checkbox as described above.

If you don't understand, can't you watch my screen via teamviewer or something like that?

Hi,

As a note, the option is only available if you have the "view password" permission on the entry

The view password is Inherited (Everyone) on that item but does not help.

So this will be solved in the next release?

Hi,

Thanks, no problem!

As I told already in another forum topic:

I now that Devolutions works very FAST on resolving issues like this!!!!

Hi,

Ok.

Thanks!

Workaround is not working for me.

I want Equivalent URL's and that's not possible there.

As a new license owner I'm creating all the entries now and I don't want to change them afterwards.

I'll just wait on the fix.

I now that Devolutions works very FAST on resolving issues like this!!!!

Version : 2019.1.39.0 Enterprise Version.

Advanced Data source: SQL Server

Hi,

I can't find the setting to enable to use the password variable from a private vault item.

As an administrator I have this option but a non -administrative use does not have this item.

He does not have this option visible so he cannot set this checkbox.

I created items, as an administrator, with $PASSWORD$ variables coming from private vaults.

A non-administrator can't use them.

Where to enable this?

Korstiaan

Hi,

I notice 2 small, but rather enoying, behaviors on RDM (2019.1.39.0 64 bit Enterprise):

If I open an SSH item via right click or via the actions button it opens well AND in front of the RDM program.

But if I double click on the item it always open behind the RDM program?

I only have this on SSH items. But sometimes it works fine and then suddenly this behavior happens and stays like this.

If I drag an item and then press the Ctrl button to make a copy of this item I don't see the + icon appearing.

It only appears for a fraction of a second after I release my mouse button.

Therefore it makes it difficult to see the difference between move or copy while dragging.

I just don't know if the second item has to do with the fact that I'm using RDM windows via a Parallels VM....

The first item happens also with my colleague on a normal PC.

RDM version: 2019.1.39.0 64 bit Enterprise version

Hi,

If I use $COMPUTER_NAME$ in my website URL it shows the correct name in the overview tab BUT if I open the site it does not take the value.

So if I have a computer name ATS078, and I fill in the URL: https://$COMPUTER_NAME$-ilo the overview tab shows https://ATS078-ilo but if I open the url it does not take this value but the site opens as https://%24computer_name%24-ilo.

What did i forgot to set?

Korstiaan

Hi,

Great, thanks!

I will test it as soon as it becomes available.

Do you think the vault selector will be available in the windows version in the near future? (ask your colleagues...)

I already have 10 vaults (printers, servers, telephony, switches & routers, ..., so I need to change quite a lot.)

Korstiaan

Hi,

You need to use website and not web browser session entries because only these have Equivalent URL's!

For the second point:

That's possible in MacOS. Others do it as well. (1password, ...)

Hiding the app icon is not a major problem as long as it does not open every time I open an item from the menu bar icon.

The extra annoying thing is that (point 3) you first have to right click and then directly a window opens with that item. I don't want that screen. It bothers me a lot because I have to click it away every time then.

And indeed the menu item icon should show the entries, AND you should be possible to change vault (also a problem in windows), and last but not least choosing an item opens the site directly without opening anything else.

BUT ALSO FOR BOTH MAC AND WINDOWS (VERY URGENT):

YOU're people/video's encourage to use different vaults.

I did that, it's fine, BUT this gives a lot of problems like described above, the taskbar icon in windows and menu icon in mac has forgotten this, which is bad.

BUT ALSO, the Chrome EXTENSION is not foreseen to work with different vaults.

RESULT: If I open a site it does find/fills in the credentials if you RDM program has not to correct vault selected.

THIS IS REALLY A MAJOR problem.

You now have to open RDM application, search or select the correct vault where the wanted site is in, and go back to chrome, open a new tab/window again, ...

This is too difficult.

Also creating a new item, starting from chrome: you have to watch out where he creates the item. It creates it in the last selected vault of the RDM application... Not good. Ask where or think of a general place to store this.

I hope you these problems solved ;-)

Hi,

I recently installed the RDM Enterprise 2019.1.6.0 on my MBP.

I do not find/understand the BAD working under mac os...

• I want to open the website when I double click an item, not the item itself. Like in my windows RDM. Where to change?

• Hide the application, so that just the menu bar icon is visible. (Like in RDM Windows). Now you will have to keep the app open, it stays in the open applications at the bottom...

• When I click an item in the menu from the taskbar it opens the item, in the app, instead of the link of that item? What is the use then of that menu bar icon? Now you to right click an item, it already opens the item of the app (=BAD, RDM application window pops out), and then choose Naviage URL...

• This is terrible behavior!

• How to solve this?

In MacOs AND windows, the taskbar item cannot select a vault. It only shows the items of the selected vault from the full app?

Devolutions video's encourage to use vaults but also make it possible then to choose the vault from the taskbar menu.

A lot of work to do Devolutions ...

Hi,

Waaw, that's superfast!

I will test it as soon as I see it appear.

In the meantime, may I ask you something;

If I click on the Web login item it always open in the internal browser. (Even if external is defined).

To open the link via an external browser, you how first have to Edit, click on Login (web) and then click on the link "Go to website".

Then it opens external (and I can then use the plugin).

Am I missing something or is there a faster way to open in external browser?

The problem is that some websites don't work 100% in the internal browser. (script errors)

Korstiaan