Users

All Posts (28)

avatar

dbrame

Disabled

Sign into OWA (outlook.office.com)

avatar
avatar
avatar
avatar
avatar
dbrame
Disabled

I just sent the video

Sign into OWA (outlook.office.com)

avatar
avatar
avatar
avatar
avatar
dbrame
Disabled

All of these settings are in place but I am still being prompted for a password.

Sign into OWA (outlook.office.com)

avatar
avatar
avatar
avatar
avatar
dbrame
Disabled

Hello,

The auto-fill will only work with the Devolutions Web Extensions : https://devolutions.net/fr/home/browserextensions , make sure you have it downloaded on either Chrome or Firefox try to create an external (This only works in external mode) Web Browser session. Let me know if this works for you!

Best Regards,

Right. I am telling you it is not working with the extension. I stated in my first reply that i lunched them externally and they failed to auto login; I did leave out that I have the extensions for chrome. Not using Firefox.

Sign into OWA (outlook.office.com)

avatar
avatar
avatar
avatar
avatar
dbrame
Disabled

14.1.30.0 and I was trying to run embedded.

tried launching externally with Chrome and IE, however both failed to enter in the password for auto sign in.

Sign into OWA (outlook.office.com)

avatar
avatar
avatar
avatar
avatar
dbrame
Disabled

I am trying to setup an auto login for Outlook online, but since it asks for the username on one page and the password on another it makes it difficult to figure out what settings one needs. I have tried IE and Chrome (Chrome is preferred but not necessary), but not much happens.

I have read these forum posts but they did not help:

https://forum.devolutions.net/topic11854-office--auto-fill-login.aspx

http://forum.devolutions.net/topic10706-ie-form-loginembedded-mode.aspx#post39672

outlook.office.com opens up to

https://login.microsoftonline.com/common/oauth2/authorize?client_id=00000002-0000-0ff1-ce00-000000000000&redirect_uri=https%3a%2f%2foutlook.office.com%2fowa%2f&resource=00000002-0000-0ff1-ce00-000000000000&response_mode=form_post&response_type=code+id_token&scope=openid&msafed=0&client-request-id=5bafe8de-a2dd-4361-a4ee-9f68224f8b93&protectedtoken=true&domain_hint=touchette.org&nonce=636915520419488667.49d1519c-dd13-43de-b6fc-f4871c743b57&state=DcvBDYAgDEBR0CGcArFSWjgYd3ADpBg9mRiM68vh_dvXSqm-6Ro9tSgmRxG8nyeEiCEQ8YhRwEPMRgScQSfF7HRkc2BgyIxu96zbO9j7S3ZNbz23ItdTcl3q85Yf&sso_reload=true

RUNS AS tab in the user specific settings

avatar
avatar
avatar
avatar
dbrame
Disabled

Previously the MMC tabbed in was working just fine outside of the Runas specific user. but there were a few times that I did see that unresponsiveness you mentioned, though it did not happen often.

RUNS AS tab in the user specific settings

avatar
avatar
avatar
avatar
dbrame
Disabled

this did work as a nice work around. the MMC does not opened tabbed in RDM (the CMD does and stays there as long as the MMC is open), but it does run it as the user i need.

RUNS AS tab in the user specific settings

avatar
avatar
avatar
avatar
dbrame
Disabled

Sorry never received this notification of updates. i tried this solution cmd entry that i have already created to open an MMC snapin as my domain admin. right now i am getting an a unable to execute the application!: "mmc.exe"

for the credentials in the entry they are set to inherit from the top folder where my credentials are at through pleasant password server. I also over wrote the creditials to look directly at my pleasant password, and that did not work. I also manually entered in the credentials to test this and that also gave me the same error.

Can you "run as" RDM as another user?

avatar
avatar
avatar
avatar
dbrame
Disabled

unless you put this in the Target of the shortcut you are launching RDM from C:\Windows\System32\runas.exe /user:domain\username /savecreds

you will enter in your password the first time and not again until you change it.

RUNS AS tab in the user specific settings

avatar
avatar
avatar
avatar
dbrame
Disabled

has there been any update on this topic?

RUNS AS tab in the user specific settings

avatar
avatar
avatar
avatar
dbrame
Disabled

Thanks. You never know what you need until the issue arises.

Launch CMD Line Connection as another user failing

avatar
avatar
avatar
avatar
dbrame
Disabled

I posted the same thing in the feature request forum yesterday. great minds.

RUNS AS tab in the user specific settings

avatar
avatar
avatar
avatar
dbrame
Disabled

Goes back to an issue i am currently troubleshooting with the support team. I need to run a CMD line connection via another user. the CMD settings does have a RUN AS tab, however since this is a team data source it would not be wise to put personal credentials as the default RUN AS. The user specific settings does have the override credentials, however that override does not work for RUN AS a different user of CMD line.

Here is the original post as a reference, though there are some emails between myself and a technician that lead me to his idea.

https://forum.devolutions.net/topic30177-launch-cmd-line-connection-as-another-user-failing.aspx

Launch CMD Line Connection as another user failing

avatar
avatar
avatar
avatar
dbrame
Disabled

So i've been a bit busy and have not had time to get back to this issue. I did have a screen session time setup with an engineer a while back but they never showed up, and i never heard back about a rescheduling. We are starting to roll out RDM to our entire IT team, and I would like to have this resolved if it all possible.

Launch CMD Line Connection as another user failing

avatar
avatar
avatar
avatar
dbrame
Disabled

has there been any update on the resolution of this issue? I have been updating RDM when the update role out but i am still seeing this issue.

Launch CMD Line Connection as another user failing

avatar
avatar
avatar
avatar
dbrame
Disabled

Thanks James

Launch CMD Line Connection as another user failing

avatar
avatar
avatar
avatar
dbrame
Disabled

Options 1 and 2 ended in a failure to open the session, and option 3 still opens the app under my local user account and not the correct Admin account.

i know i can create a short cut on my desktop with the C:\Windows\System32\runas.exe /user:domain\username /savecreds "mmc \"C:\Program Files (x86)\Microsoft Configuration Manager\AdminConsole\bin\Microsoft.ConfigurationManagement.exe"" in front of the run line, which I am assume this is what RDM is trying to do (or something along those lines). I am correct in that or is RDM leveraging another way to "run as" a different user?

Launch CMD Line Connection as another user failing

avatar
avatar
avatar
avatar
dbrame
Disabled

I have create a CMD Line session that launches SCCM Console, however I need it to run as another administrator. This is a team connection that uses Pleasant Password as the credential repository. This being the case I cannot set the credentials within the root settings of the connection. I can have it prompt for Pleasant Password credentials, however the connection fails once the credentials are selected.

How would you recommend setting up this session so that the SCCM console .exe runs against credentials from Pleasant Password successfully?

Session information:

Credentials are set to inherit by default.

Run: "C:\Program Files (x86)\Microsoft Configuration Manager\AdminConsole\bin\Microsoft.ConfigurationManagement.exe"

Run As tab: None

I have tried the credentials and "Run As" in different settings but they usually come back as failed. The users set their session credentials in the "User Specific Settings".

Pleasant Password Server Account Cannot Be Verified

avatar
avatar
avatar
dbrame
Disabled

I also had the User settings for Pleasant password set to RDM vault key that was also using my old password. There were still some connection that were using my RDM private key that I did not get moved over to Pleasant Password as well. I used File > My Account Settings > User Specific Settings List where i could see all the connections using custom settings.

Pleasant Password Server Account Cannot Be Verified

avatar
avatar
avatar
dbrame
Disabled

I had to go to File > My Account Settings > Settings > Pleasant Password Server and then change my password to the new one there. this is odd because I do not remember putting my Password here, and this account did not create the entry. Does RDM auto fill the Pleasant Password Server settings using integrated security?

Pleasant Password Server Account Cannot Be Verified

avatar
avatar
avatar
dbrame
Disabled

the connection is made through the Pleasant Password Entry. this is the error message that is reported:

PassMan.Client.PassManAuthException: The account cannot be verified. ---> System.Net.WebException: The account cannot be verified. ---> System.Net.WebException: The remote server returned an error: (400) Bad Request.

at System.Net.WebClient.UploadDataInternal(Uri address, String method, Byte[] data, WebRequest& request)

at System.Net.WebClient.UploadString(Uri address, String method, String data)

at PassMan.Client.PassManWebClient.UploadString(String address, String method, String data)

--- End of inner exception stack trace ---

at PassMan.Client.PassManWebClient.UploadString(String address, String method, String data)

at PassMan.Client.PassManClient.c42b5914f836ded14534c999c17dcad6b()

--- End of inner exception stack trace ---

at PassMan.Client.PassManClient.c42b5914f836ded14534c999c17dcad6b()

at PassMan.Client.PassManClient.GetDatabaseHierarchy()

at Devolutions.RemoteDesktopManager.Business.PleasantPasswordServerReader.GetDatabaseHierarchy()

The Datasource is a SQL back end that uses integrated security, which Pleasant Password does as well. The account used for both is my domain account, which is working everywhere else but when RDM tries to access Pleasant Password. I have confirmed through the Keepass client and through the Pleasant Password server that I can log in using my domain account.

Pleasant Password Server Account Cannot Be Verified

avatar
avatar
avatar
dbrame
Disabled

Today was that special day when my domain password was to be retired, and I was required to create a new password. I updated my password in the Pleasant Password Keepass, however none of my connections work within RDM. When I go connection setting and click on the link of the password entry RDM saysint that the account cannot be verified. I have verified that the change was also seen by the Pleasant Password Site, which pulls the entry straight from our Pleasant Password SQL Database.

Any Ideas on why my Pleasant Password Account cannot be verified?

SQL Management Studio Not Embedded

avatar
avatar
avatar
dbrame
Disabled

Not everyone can be Merlin

SQL Management Studio Not Embedded

avatar
avatar
avatar
dbrame
Disabled

I have created a SQL Management Studio connection and I create a Command Line entry to open up SQL Management Studio without any preset connections, but none of them are Embedding into RDM. they all open SQL Management Studio externally when it is set to Embedded.

Any idea how to work around this?

Double Click Command Line entry to open the connection.

avatar
avatar
avatar
dbrame
Disabled

I did that yesterday. thanks for the pointer.

1 - 25 of 28 items