Robinn

But how do I know what to fill in regarding Netextender, the only thing I can do now is click the Netextender button on the portal that I login to.

How do I configure pressing this button or how do i figure out how to connect directly with the netextender VPN? What type of remote connection do I choose when connecting to a portal first and then clicking a Netextender button?

Thanks for your time!

Hi all,

I have a customer which requires me to login to a SonicWALL - Virtual Office, I can configure this login in Remote Desktop manager as Web Browser type.

I noticed on the VPN type logins, its possible to select a SonicWALL Netextender type VPN.

Question is if its possible to automate this further, is it possible to access the netextender VPN directly and skip the virtual office login, or automate the mouseclick on the netextender bookmark in the virtual office page?

The only thing I have now is the URL of the SonicWALL Virtual Office but i can see in the IE Development Tools that the following code is executed when pressing the Netextender bookmark ; PORTALV2.netExtenderClicked().

Hope its possible to automate things further..

Thanks for your time!

Hi Markus,

That playlist suggestion did the trick, thanks!!

I now added a command line on after disconnect of the RDP session (the second entry in the playlist) to close the VPN session that was opened in the first session, that works, but the first session stays active. Is there a way to close that session as well (even though the VPN disconnects, I would like to see that green Arrow gone on the first entry and close the session completely).

Best Regards,

Robin

edited by Robinn on 4/10/2015

Hi Markus,

Thank you for your suggestions, I will try both options to see what works best for us.

One question for you; where or how do i place a comment-box where you have to click ok after vpn connect? Is that something I can script/configure in the webentry option?

Thanks again!

Best Regards,

Robin

Hi,

This might be an easy one, but i tried quite some different options now, but cannot manage to get it done right.

I want to open a cisco anyconnect VPN connection which i can connect like this : "c:\program files\cisco\cisco anyconnect secure mobility client\vpncli.exe" -s connect hostname.com <c:\temp\password.txt

When entering the above in a command line, it will not connect, it will just open the client in a dos box.

other option is to use a web connect, and insert the URL,user and password there, this works, but when i want to connect to an RDP afterward, it just immediately starts to connect to the RDP, before the login on the website (and connect to VPN) was succeeded. Not sure where to build in a wait when using the command line to connect to an RDP afterwards..

Using this as command works, but no option to wait for the vpn to connect there .. mstsc.exe "C:\Users\Me\Documents\RDP\customer.rdp"

Do you have a suggestion for the best way to do this?

Thanks for your time!

Hi,

Might be another easy one, but how do I open a RDP connection after logging using the Web Browser (http/https) connection type?

Thanks for your time!

Hi,

Tried your suggestion, and logged on multiple times, the URL of the button is ALMOST the same. It ends with a LaunchId=xxxxxxxx, and this final part changes even every time I check the URL in the properties of the button, even without logging on again.

hi Robbin,

why don't you add the command you want to execute upon logon to the task scheduler and execute it using the trigger "when i log on"?

KR

Guenther

Didn't think of that before but I created a task that only runs when my user logs in, works great!

Thanks for that!

I guess this is an easy one.. I connected with VPN and RDP, but on this desktop I am on now, I need to make one more RDP connection.

I placed an RDP file in the C:\temp folder on the machine, and I wrote a Typing macro line : mstsc.exe c:\temp\customer.rdp{ENTER} (combined with an initial wait of 30 seconds), I see a popup that RDM is executing a macro, but nothing happens.

Is there a better/different way to do this?

Hi,

Were you able to test this? Reproducing this should be quite simple; just create a desktop shortcut to a weblogin connection, and close RDM, then try connecting using the shortcut on the desktop.

Thanks!

Hi,

Did you have time yet to check the source of the page and check the possibility of scripting a button push?

Thanks!

Found the buttonID in the viewsource of the page, is there a way to script a click of this button?

Thanks for your time!

Hi, did you check the example I sent you yet?

I now have several web browser entries that have no user/pass filled in when I do not start RDM before I click on a shortcut. When I have RDM (9.0.3.0) running in the background I can use the shortcuts on my desktop succesfully. Seems like the desktop shortcuts in combination with web browser entries does need RDM running in the background in order to work properly.

After I login via a webbrowser with user/pass and login button (contact type is Web Browser), i get to the screen as attached to this forumpost. Using TAB ENTER does not press the big button on the screen, I was wondering if there is another way to push the button via scripting.

Hi all,

This might be an easy one, but I havnt been able to figure it out yet;

I have a connection setup that logs into a Citrix/Xenapp webpage that contains a button that i want to press after logging in to the page the button is on.

How do I archieve this? I did a view source of the webpage and discovered the ID of the button, do I need to write some VB or Javascript, and where would I add this script in the connection?

Thanks for your time.

There is one field that needs to be completed with a code we get from the customer, so I can see the webpage with the user/password/token field.

The user/password are filled when I open the webpage from within RDM, so I only need to phone the customer for the tokencode. When I start the shortcut on my desktop I get a webpage with three empty fields (instead of only an empty tokencode field).

Hope I cleared it up :)

Not sure if anyone noticed this yet, and whether it is a valid report but still;

In version 8.4.5.0, when creating an entry of type Web Browser, and filling in the details of the form that is on the website, it works when you directly open the entry from within RDM, but all fields are empty when using the desktop shortcut that was created for the entry.

I only recently discovered this product and thinking of buying a license for our company. We have 3 clients of ours that we login to using the 2x Client as well, so an addition to the rdm would be really nice :)