DB2 DataSource
Hi!
Is there any Progress on this. In my opinion a ODBC DataSource or such a think would be very usefull. I am willing to help if you like.
Greetings,
Franz
Bug in PowerSehll Set-RDMCurrentDataSource
since update to 13.5.4 the following script does not return any rdm-sessions:
Import-Module "${env:ProgramFiles(x86)}\Devolutions\Remote Desktop Manager\RemoteDesktopManager.PowerShellModule.psd1"
$list = Get-RDMDataSource
Set-RDMCurrentDataSource $list[0]
Get-RDMSession
# no sessions in the output
I have to set a different datasource first and then change to list[0] to make it working.
Import-Module "${env:ProgramFiles(x86)}\Devolutions\Remote Desktop Manager\RemoteDesktopManager.PowerShellModule.psd1"
$list = Get-RDMDataSource
Set-RDMCurrentDataSource $list[1] # Different DataSource
Set-RDMCurrentDataSource $list[0]
Get-RDMSession
# sessions are in the output now
I am running the scripts from normal powershell and ot from the PowerSehll-Tool in RDM
Could you please check why this is not working
DB2 DataSource
Is ist possible to develop an addon for this purpose myself?
Do you have APIs fpr this?
DB2 DataSource
Hi!
Would it be bossible to add DB2 (ODBC) as DataSource backend. I checked your DB structure on our SQL-Server and it is not very complicated. So to implement this structure on a DB2 database should be simple.
DB2 has a nice Express-C Edition which is free and available on many platforms (also IBM Power)
Greetings,
Franz
Credentials and connections merged after upgrading to 13.5.0.0
Yes. i am running 13.5 and according to the topic of this post i have to change all out 60+ Datasources becuase the behavoir for the merge-Settings is now in the DataSource.
So becaus this would be a lot of manual work my question is if i can set this setting via PowerShell
Credentials and connections merged after upgrading to 13.5.0.0
Okay. But can i do this change with PowerShell?
Credentials and connections merged after upgrading to 13.5.0.0
Hi!
We have about 600 DataSources. Can we change this setting via PowerShell so that we dont have to do it manually?
Greeings,
Franz
New-RMDUser not working anymore
Could you please update the documentation and the help of the commandlet
Greetings,
Franz
New-RMDUser not working anymore
New-RDMUser is not working AGAIN
$user = New-RDMUser -Name "New SecurityGroup"
New-RDMUser : Es wurde kein Parameter gefunden, der dem Parameternamen "Name" entspricht.
In Zeile:1 Zeichen:21
+ $user = New-RDMUser -Name "New SecurityGroup"
+ ~~~~~
+ CategoryInfo : InvalidArgument: (:) [New-RDMUser], ParameterBindingException
+ FullyQualifiedErrorId : NamedParameterNotFound,RemoteDesktopManager.PowerShellModule.NewRDMUserCommand
Please help!!
My Version is 13.0.6
New-RMDUser not working anymore
it seems that the call syntax has changed. whe i use:
$user = New-RDMUser testusername testfirstname
it works. But it is necessary to give the firstname as parameter
is this by intention or a bug because the syntax doesnot match the documentation
New-RMDUser not working anymore
When i start the RDM Powershell from within RemoteDesktokManager i am not able to call New-RDMUser anymore. When i do so i get this error:
PS C:\Program Files (x86)\Devolutions\Remote Desktop Manager> $user = New-RDMUser -Name 'test'
New-RDMUser : Object reference not set to an instance of an object.
At line:1 char:9
+ $user = New-RDMUser -Name 'test'
+ ~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [New-RDMUser], NullReferenceException
+ FullyQualifiedErrorId : System.NullReferenceException,Devolutions.RemoteDesktopManager.Business.PS.Commands.NewRDMUserCommand
This is the environment:
RDM Version is 11.0.18.0
RDM is started as Administrator
After disconnect event on VPN-Sessions
but this commands are executed BEFORE the tunnel is disconnected.
i need them to be executed AFTER the tunnel has disconnected.
could you implement this feature-request in the next release?
After disconnect event on VPN-Sessions
as i wrote. it is necessary to define a rout before we can connect the vpn tunnel because the tunnel has to be routet over a specific Gateway.
after the tunnel is disconnected we want to disable this specific Routing. it has nothing to do with the traffic in the tunnel.
when i use the "before disconnect" of the tunnel to remove the route the tunnel cannot be closed in a clean way because it is simply destroyed because the pptp packets do not find the way to the Destination any more.
to describe the Situation a litte better: all of out technicans are connecting to our customers over a internal geteway but it is not possible to define this gateway as their default gateway. so we have to do a routing.
there is no better solution and it would work without any Problem if we could use the "after disconnect" event. is it so hard to implement this?
After disconnect event on VPN-Sessions
command line
we add a route prior to connect to the vpn server and we want to remove it after disconnect. the route has nothing to do with the vpn network itself. we need to route the vpn tunnel over a specific gateway.
After disconnect event on VPN-Sessions
Please implement the "After disconnect" in the Events Tab of a VPN-Session
Update DataSource Properties with PowerShell
We have about 20 DataSources on a SQL-Server. I did not find a way to Change the Server-IP or the Caching-Mode from PowerShell.
If we move our SQL-Server or want to configure other Settings for Timeout or Caching we have to do it 20-times manually in the UI.
Is ther a way to update the Properties of a Datasource with PowerSehll?
Important: i mean DataSource not Session
edited by franzr77 on 8/5/2014
Status change not applied when intelligent caching
When we activate the "intelligent Caching " on a datasource we have the Problem that when i Change the "Status" of a Session to e.g. "Disabled" this is not reflected in the UI. So Setting the "Status" of a session doesnot work when intelligent caching is enabled.
we are using Version: 9.2.10.1. Datasource is on a MS-SQL-Server
Sub-Connection Document not saved
MSSQL-Server
Sub-Connection Document not saved
When i add a Text Document as Sub-Connection to an existing Session, the Content of the Document is never saved.
My Version is 9.0.2.0
Better PuTTY support
Sorry i ment SSH-Shell but thats not the Problem here.
i attached screenshots of both viriants of calling the same Server
one session is a Default ssh-session with putty as type. when you open the session you get the putty window embedded with the title-bar
the other session calls the putty from command line and when you open it putty gets embedded nicely without the title-bar.
there is an older post in the Forum where someone of Devolution says that it is not possible to get rid of the title-bar in the embedded Display.
as i showed it seems to be possible because i called putty with a commandline-session and had not window-header-bar
i attached an aexport of the two sessions
edited by franzr77 on 8/9/2013
Tree icon for active VPN Connection not changing
but you have the gateway-ip or? this is used for the post-connect commands
Better PuTTY support
instead of using the SSH-Session with the putty-configuration i am using a Commandline-Session with the commandline above.
then putty opens in the embedded tab with now window-title and window Buttons. it Looks like the ssh-session
Tree icon for active VPN Connection not changing
When i open i VPN Session the Icon in the Navigation-tree is not updated. so i cannot see that i have an active vpn-connection
Better PuTTY support
Currently a PuTTY Session always Shows the PuTTY Window (titlebar with icons) in the embedded tab. i found out that this can be avoided when you start putty with a commandline-session with this normal command:
"C:\Program Files (x86)\PuTTY\putty.exe" $USERNAME$@$HOST$ -pw $PASSWORD$
why couldn't you make this the Default behavior
the SSH-Session is way to slow when Scrolling and when you have much console output the pc is unter heavy load and you cannot break the active command