Users

All Posts (13)

avatar

icompdavid

Continuous reconnects (Probably since Microsoft switched to Windows App?)

avatar
avatar
avatar
avatar

Hello again,

Now we've had the chance to try macOS 15.1 over a few days and that seems to have resolved our issues completely!

Reading the release notes of 15.1 doesn't seem to shed any light on if anything bug-related to SSL or TLS was fixed.

There seems to be a couple of users in different parts of the internet as well that have had issues with SSL and TLS that have been resolved in 15.1

Thank you so much for the support! :)

//David

Continuous reconnects (Probably since Microsoft switched to Windows App?)

avatar
avatar
avatar
avatar

Hello again,

I've had a colleague of mine switch to FreeRDP for the day, to see if he expereiences these drops on Window as well.

However, some very promising news..

I started googling around TLS and SSL issues starting with macOS 15 and stumbled on a multitude of articles describing problems in relation to a the changes made in the network stack, so the issue might just be Sequoia-sepcific.

Following that, I applied macOS 15.1 and have so far had two 2h sessions onto separate jumphosts simultaneously without a single drop, which is so far a day and night change..

I'll update later today :)

//David

Continuous reconnects (Probably since Microsoft switched to Windows App?)

avatar
avatar
avatar
avatar

Hello,

No obvious change except for moving onto macOS 15 when it was released. The issue is not present on Windows-machines running any current RDM version.

I will ask our server technicians if they've made any changes in the recent month in regards to TLS handling.

We contiunally deploy the latest version of RDM, so we're trying to stay current.

We use RDP to a subset of tiered jumphosts which in turn allow for further access. We don't use a proxy for RDP traffic. We do have a firewall, but we do not block internal traffic on the specific vlan that we use to connect to jumphosts.

We do utilize M365 Defender, but logs show no traces of any blocks.

The issue is present when connecting to all of our jumphosts. I could try to set up a lab with direct access to another a more "open" server and try to see if the issue is reproduced there as well.

I would almost assume that the issue lies within our configuration somewhere, since there doesn't seem to be anyone else with this specific behaviour :/

//David

Continuous reconnects (Probably since Microsoft switched to Windows App?)

avatar
avatar
avatar
avatar

Quick update,

Issue is still present on 3.5.1 as well. This stands out in the session logs, exactly when the connection drops:

[13:39:41:714] [21030:762bf000] [DEBUG][com.freerdp.core.heartbeat] - [rdp_recv_heartbeat_packet]: received Heartbeat PDU -> period=1, count1=8, count2=8

[13:39:41:714] [21030:77743000] [DEBUG][com.freerdp.core.heartbeat] - [rdp_recv_heartbeat_packet]: received Heartbeat PDU -> period=1, count1=8, count2=8

[13:40:24:649] [21030:77743000] [WARN][com.freerdp.core.transport] - [transport_ssl_cb]: Unhandled SSL error (where=16392, ret=532 [fatal, bad record mac])

[13:40:24:650] [21030:77743000] [ERROR][com.freerdp.core.transport] - [transport_read_layer]: BIO_read retries exceeded

[13:40:24:650] [21030:00393240] [ERROR][com.freerdp.core.transport] - [transport_default_write]: BIO_should_retry retries exceeded

[13:40:24:650] [21030:00393240] [ERROR][com.freerdp.core] - [transport_default_write]: ERRCONNECT_CONNECT_TRANSPORT_FAILED [0x0002000D]

[13:40:24:650] [21030:77743000] [ERROR][com.freerdp.core] - [transport_read_layer]: ERRCONNECT_CONNECT_TRANSPORT_FAILED [0x0002000D]

[13:40:24:650] [21030:77743000] [ERROR][com.freerdp.core] - [transport_read_layer]: TODO: Trying to set error code ERRCONNECT_CONNECT_TRANSPORT_FAILED, but ERRCONNECT_CONNECT_TRANSPORT_FAILED already set!

[13:40:24:650] [21030:77743000] [DEBUG][com.freerdp.core.transport] - [transport_check_fds]: transport_check_fds: transport_read_pdu() - -1

[13:40:24:650] [21030:77743000] [DEBUG][com.freerdp.core.rdp] - [rdp_check_fds][0x3b50a3200]: transport_check_fds() - -1

[13:40:24:650] [21030:77743000] [DEBUG][com.freerdp.core] - [freerdp_check_fds]: rdp_check_fds() - -1

[13:40:24:650] [21030:00393240] [ERROR][com.freerdp.core.transport] - [transport_default_write]: BIO_should_retry retries exceeded

[13:40:24:655] [21030:77743000] [DEBUG][com.freerdp.core.rdp] - [rdp_finalize_reset_flags][0x3b50a3200]: [CONNECTION_STATE_ACTIVE] reset finalize_sc_pdus

[13:40:24:655] [21030:77743000] [DEBUG][com.freerdp.core.rdp] - [rdp_client_transition_to_state][0x3b50a3200]: CONNECTION_STATE_ACTIVE --> CONNECTION_STATE_INITIAL

Continuous reconnects (Probably since Microsoft switched to Windows App?)

avatar
avatar
avatar
avatar

Hello again,

I tried disabling sandbox mode but the issue was still present.

I noticed 3.5.1 was released recently so I will try to update and see if my issues have been resolved :)

Either way I'll try to enable session logging.

//David

Continuous reconnects (Probably since Microsoft switched to Windows App?)

avatar
avatar
avatar
avatar

Hello,

I'm always opening sessions embedded :)

I have a colleague which is experiencing the same behaviour. Also on macOS.

//David

Continuous reconnects (Probably since Microsoft switched to Windows App?)

avatar
avatar
avatar
avatar

Hello,

I'm running 2024.3.4.4 since 11/10.

I'll attach the application log with the events from the last 60 days in a .zip. I was unable to attach the log directly.

Let me know if you're interested in any other logs :)

//David

Continuous reconnects (Probably since Microsoft switched to Windows App?)

avatar
avatar
avatar
avatar

Hello,

Since I received the update that replaced "Remote Desktop App" with "Windows App" (4th of october for me) on macOS, I'm having continuous reconnects happen within RDM all the time. Upwards to 150 times a day.

Could it be a bug from RDM or the Windows App?

Has anyone else reported this behavior?

//David

Script errors when login to account

avatar
avatar
avatar
avatar
avatar

@Jeff Dagenais,

Running local data source, SQLite.

Kind regards, David

Script errors when login to account

avatar
avatar
avatar
avatar
avatar

Hi again,

I did quite the workaround the other day. I installed a clean virtual W10 machine with 1909 and the script errors were gone. I logged in, exported all necessary settings and moved them over to the new computer running 20H2 and then imported all settings and now at least I can access all credentials and saved sessions. However the Online Backup function now instead gives a "Unable to login. Please verify your internet conenction.".

Kind regards, David

Script errors when login to account

avatar
avatar
avatar
avatar
avatar

Hi,

Same problem occurs when trying the method above with the portable version. Getting a script error.

//David

Script errors when login to account

avatar
avatar
avatar
avatar
avatar

Hi Jeff,

Logon through IE works fine when launching separately for me.

Local Data Source, SQLite.

It's not just trying to use the backup function for me and the script error appeared when I tried registering a new computer on my account during first setup.

//David

Script errors when login to account

avatar
avatar
avatar
avatar
avatar

I'm getting this exact problem. It went from previously working, to just a flashing login-screen which prompted a sign-in failure and now to this exact message.

I've tried on multiple computers, domain-joined and not and all are experiencing this behavior. Tried changing the embedded browser-settings in RDM but it didn't help.

Running Win 10 Ent 20H2, build 19042.746

//David

1 - 13 of 13 items