Users

All Posts (18)

avatar

edifus

Not being prompted to start in offline mode

avatar
avatar
avatar
avatar
avatar

Hi,

I have verified our source code and the only reason I see is that the offline mode is not available on your machine. Are you able to manually go offline?

Not sure what you're trying to ask here. The issue is when the application is starting up for the first time. By definition, this machine will always be "offine" from the SQL source the first time the application starts. The SQL server is unavailable until the VPN connection is started. The VPN connection doesn't get connected until after RDM is started because it is a connection defined within RDM.

The whole point of the option is to prompt to always start in offline mode. Instead, RDM is ignoring that option and trying to connect to the SQL server immediately when started instead of prompting to start in offline mode.

To answer your question, when I'm online I've always been able to go offline manually, that has never been an problem..

Not being prompted to start in offline mode

avatar
avatar
avatar
avatar
avatar

Issue came back again today.

I have tried the suggestion to disable prompt to start in offline mode, close and re-opened the application. Got the error as expected, re-enabled the option to prompt to start in offline mode. Closed and re-opened RDM and there is still no prompt to start in offline mode.

Performing these steps made the normal fix not work properly. The normal steps to connect to VPN and then open RDM didn't fix the issue. I had to go into %localappdata%\Devolutions\RemoteDesktopManager. I had to find a file ending with .SHK. I had to delete the file and the folder that matched the same filename. Once that was done I could reconnect to the SQL source while on VPN.

Not being prompted to start in offline mode

avatar
avatar
avatar
avatar
avatar

I have verified that the options is selected but I don't believe I have tried what you suggested. It will be a few days/weeks before the error occurs again. I have been resolving the issue by manually connecting to my VPN. Once the connection is up, the application will open in online mode, and it will prompt to start in offline mode the next time I open the application.

Not being prompted to start in offline mode

avatar
avatar
avatar
avatar
avatar

Date: 6/21/2016 5:49:51 AM

Version: 11.5.4.0 - 32-bit

Type: Error

Message: System.Data.SqlClient.SqlException (0x80131904): A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)

at System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, UInt32 waitForMultipleObjectsTimeout, Boolean allowCreate, Boolean onlyOneCheckConnection, DbConnectionOptions userOptions, DbConnectionInternal& connection)

at System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal& connection)

at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)

at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)

at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)

at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)

at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)

at System.Data.SqlClient.SqlConnection.Open()

at Devolutions.RemoteDesktopManager.Business.DataSources.DatabaseConnectionDataSource.GetData(String sql, IDbDataParameter[] parameters)

at Devolutions.RemoteDesktopManager.Business.DataSources.SQLServerConnectionDataSource.GetDataSourceSettings()

at Devolutions.RemoteDesktopManager.Managers.ConnectionManager.c29fbd34504079a3525ca4c390d5d4074(BaseConnectionDataSource cf40b69955d088020784eb92737f0a505)

ClientConnectionId:00000000-0000-0000-0000-000000000000

Error Number:-1,State:0,Class:20

****************************** SqlError ******************************

Message:A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)

Date: 6/21/2016 5:49:51 AM

Version: 11.5.4.0 - 32-bit

Type: Error Silent

Message: System.Data.SqlClient.SqlException (0x80131904): A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)

at System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, UInt32 waitForMultipleObjectsTimeout, Boolean allowCreate, Boolean onlyOneCheckConnection, DbConnectionOptions userOptions, DbConnectionInternal& connection)

at System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal& connection)

at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)

at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)

at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)

at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)

at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)

at System.Data.SqlClient.SqlConnection.Open()

at Devolutions.RemoteDesktopManager.Business.DataSources.DatabaseConnectionDataSource.GetData(String sql, IDbDataParameter[] parameters)

at Devolutions.RemoteDesktopManager.Business.DataSources.SQLServerConnectionDataSource.GetDataSourceSettings()

at Devolutions.RemoteDesktopManager.Managers.ConnectionManager.c29fbd34504079a3525ca4c390d5d4074(BaseConnectionDataSource cf40b69955d088020784eb92737f0a505)

ClientConnectionId:00000000-0000-0000-0000-000000000000

Error Number:-1,State:0,Class:20

Not being prompted to start in offline mode

avatar
avatar
avatar
avatar
avatar

It took a little while to occur again but this morning, on my laptop, I was not prompted to start Remote Desktop Manager in offline mode. I am working remotely today so I need a VPN connection to connect to the SQL server.

You requested to post the "error log with the stack", can you elaborate on what you are looking for?

I just get a error window, "Unable to access the SQL Server database. Verify if you are offline or if you have an opened VPN."

Not being prompted to start in offline mode

avatar
avatar
avatar
avatar
avatar

It might be a day or two before I can get the app to do it again. I have already manually connected to the VPN and gotten RDM connected to the SQL database. If the issue is consistent, the app will work now, for a day or two, before doing what I described above. I will update this once I can provide the logs.

Not being prompted to start in offline mode

avatar
avatar
avatar
avatar
avatar

I have a single SQL data source configured. When I am on the road I do not have a direct connection to the SQL server with the RDM database until a VPN connection is established. I have the SQL data source configured to prompt to start in offline mode; this usually works. Since upgrading from 11.5.0, the application randomly doesn't prompt me to start in offline mode. I open the application, it spins trying to load sessions from an offline source (no prompt to start in offline mode). Eventually I get an error, "Unable to access the SQL Server database. Verify if you are offline or if you have an opened VPN." Going into the settings, and editing the SQL server source to verify prompt to start in offline mode is selected, close and re-open the app and there is no prompt.

I can get around this by manually connecting to VPN, but I have my VPN connections setup within RDM, and this used to work on v11.5.0 without any issues..

Old style favorites?

avatar
avatar
avatar

Thanks! I had tried right clicking everywhere but that bar.

Old style favorites?

avatar
avatar
avatar

Is there a way to get the old style favorites pane back? I can't seem to find any settings that remove the tree view in the favorites panel.

Ugly blue bar showing up on Putty Sessions

avatar
avatar
avatar
avatar
avatar

That was a fast turn around for this fix, I honestly wasn't expecting this so soon!

Thanks for getting this sorted out so quickly. Color me impressed..

Ugly blue bar showing up on Putty Sessions

avatar
avatar
avatar
avatar
avatar

Is there somewhere where the old version can be downloaded? I cannot work with this bar taking up space and sticking out with the ugly bright blue color.

EDIT: nm, I found a download on my system for v11.1 still

Ugly blue bar showing up on Putty Sessions

avatar
avatar
avatar
avatar
avatar

Yes, its the internal PuTTY implementation.

Thanks for submitting this, this bar is a terrible waste of space for a single button. It't not like there weren't already options to save the session text..

Ugly blue bar showing up on Putty Sessions

avatar
avatar
avatar
avatar
avatar

Screenshot

Ugly blue bar showing up on Putty Sessions

avatar
avatar
avatar
avatar
avatar

Since upgrading from 11.1 to 11.5 I am now seeing these ugly blue bars on every SSH session.

There is a single button, "copy all text", and I cannot find a way to remove this bar.. It never showed up before, I am not sure why something like this would get enabled on all my connections but I need a way to remove it.

Custom terminal colors

avatar
avatar
avatar

How do color overrides work for terminal sessions?

I've gone to File > Options > Types > Terminal > Colors

I've checked "Override terminal colors"

I've defined all my custom colors .

In my SSH Shell (Rebex) connection, I've gone to Properties > General Tab > Terminal Tab

Under colors, I have 3 options.

Terminal Using Color

Monochrome

Preset

If I connect using "Terminal Using Color" option, I get a monochrome window except the cursor, which is bright green.

If I connect using "Monochrome" option, I get a monochrome window except the cursor, which is bright green.

If I connect using "Preset" option, EVERYTHING is solid black. Text, background, selections, etc. I see a green cursor blinking, and I can type 'logout' to logout and watch the cursor move. But everything is solid black. You can try to select text but even the selections are solid black. I know text is selected because I can paste the output into notepad and see the login banner and prompt.

So how do custom colors get applied to a connection? The options available don't seem work and the custom colors I've defined are not applied using any of the color options on a connection's properties.

On another note, SSH Shell (Rebex) seems to have a bug where new connections are not focused. If I have a session open to serverA and open a session to serverB and start typing, all my typing is going to serverA session. You have to manually click the new sessions every time to focus the window, then you can input on the screen.

Problem with Putty and RDP

avatar
avatar
avatar
avatar
avatar

Exactly what I needed, thanks!

Problem with Putty and RDP

avatar
avatar
avatar
avatar
avatar

How do you do custom color codes? Where can I enter my own RGB values? On top of that, where are all the ANSI colors in your implementation? All I see are the generic colors, which quite frankly are UGLY if you spend any time on a terminal doing work. Which is my point that I'm stuck using Putty/Kitty since you there doesn't seem to be a way to define your own colors..

Problem with Putty and RDP

avatar
avatar
avatar
avatar
avatar

Any updates on this issue for embedded Putty/Kitty sessions?

I am currently evaluating the product for purchase and this is a really annoying bug.

I have a lot of custom sessions defined in Putty/Kitty so falling back to use the Rebex Shell is not a viable option. There are no ways to customize colors of the terminal outside the generic pre-defined colors that I can locate; so I am stuck using Putty/Kitty sessions with this annoying bug.

1 - 18 of 18 items