Users

All Posts (8)

avatar

will01

AD Synchronizer Problem

avatar
avatar
avatar
avatar

So running it with Sync Automatically turned off for domain B now only syncs results for domain A and quits. So now I don't have any results for domain B.

AD Synchronizer Problem

avatar
avatar
avatar
avatar

I just checked and Sync Automatically was disabled for the first domain (the one that ran when it shouldn't have), but was enabled on the second domain (the one I wanted to sync). So according to the log it ran for the domain that wasn't set to automatic, then ran for the domain that was set to automatic and removed the entries for the first domain when it ran. I'm going to delete all entries, and run it again to see if I get the same results in the Debug log.

If 5000 entries is where you start seeing performance problems, then we would probably put servers in one datasource, and clients in another. We don't need the clients that often and usually we us SCCM remote control. We'd only open them with RDM if we wanted to Intel AMT connection. Our server datasource would be less than 5000, but the client datasource would be large. Since we won't be using it that often, we can accept a bit of slowdown for that one.

AD Synchronizer Problem

avatar
avatar
avatar
avatar

This was with a fresh datasource. I made another SQL database so as to not impact our existing database the other engineers are using.

Another thing I noticed is after getting both synchronizers to run, searching for a machine name is VERY slow. Locks up RDM for a good 60 seconds. Is there any information regarding performance numbers? Number of connection records before slowdown occurs? Things like that? I imported all computer accounts so that we could enable iLO on the servers and Intel AMT on the clients so there are somewhere in the region of 15,000 records in that database now.

AD Synchronizer Problem

avatar
avatar
avatar
avatar

Thank you for that. I did as you said and the results were very enlightening. While it says that it will contact the second domain, when it starts processing computers, it first runs through all of the computers in the first domain. Once it completes all of the computers in the first domain, RDM stops responding while it actually creates those connections. Once those connections are created, I can see them and navigate the tree while I could see the Debug log still working. So at this point, it has all the wrong domain synced. However, Debug log is still running and now is processing the correct machines from the second domain. It gets through all of those and RDM stops responding again while creating them. Then right after that, it starts going through all of the machines in the first domain with 'Deleting connection due to no match'. RDM is not responding during this whole time. Ultimately, when it is done I had to switch tabs to private vault, and back so that I could force it to refresh. When I did, the correct connections where in the folder where I wanted them.

So it looks like for the second domain, it read through the entire first domain, created connections, THEN read through the second domain, created connections, then went back through the first domain and deleted connections. I then ran the synchronizer for the first domain, which ran normally. It only read connections from the first domain and created them in the folder I designated.

AD Synchronizer Problem

avatar
avatar
avatar
avatar

I am having trouble getting consistent results from AD Synchronizer. We have 2 domains. One for central infrastructure, one for our hospitals. The infrastructure domain is the primary login domain for our administrative accounts, domain admin accounts, and RDM users. The hospital domain contains the servers and clients we manage at each hospital location. There is a transitive trust between the two domains.

In RDM, I've created a Domains folder with 2 subfolders (one for each domain). I configured 2 synchronizers, one for each domain. The one for our login domain seems to be working properly. However, the second domain is the problem. This is what I've configured:

Mode: LDAP

Path: LDAP://DC=banfield,DC=local

Destination Group: Domains\Banfield.local

Template: (template configured for this purpose)

CHECKED: Create groups from OU/containers

Session name: Common name

Host: DNS host name (FQDN)

Search scope: subtree

Duplicate check: root

With these settings, if I click the Test Connection button it says Success. If I do Preview, it returns the expected machine names for that domain. So Preview seems to be working properly. However, when I actually run the synchronizer, the Domains\Banfield.local group is populated with the results and structure for the other domain (primary login domain) and none of the machines that showed in the Preview are created.

HP iLO Web Remote Console (.NET) Fails to Open

avatar
avatar
avatar
avatar
avatar

I am using version 11.1.0.0. I was able to get the page to open externally and as you mentioned it does not autofill. I would prefer to keep using the built in function on a single server entry instead of creating a Web Browser subentry for this, so we will just use it externally for now. If you could solve the issue with the .NET remote console that would be ideal. Appreciate you taking a look.

Connection + Hyper-V Setting + Variable Substitution = Hyper-V Console doesn't open right

avatar
avatar
avatar
avatar

I have configured a template so that the user need only enter the server name in the Name field and the rest of the properties of the connection are completed using variables. Namely, Computer = $NAME$.mmi.local (take name of server and add FQDN).

Then on the Information tab, I selected 'Is Hyper-V server' = Default. After saving the connection, I rt. click the connection > View > Console Management > Hyper-V Console but when it opens the console Host says '$NAME$.mmi.local' so it is copying what is entered in the Computer field instead of performing the variable substitution.

HP iLO Web Remote Console (.NET) Fails to Open

avatar
avatar
avatar
avatar
avatar

I created a subconnection of a server with type HP Integrated Lights Out (iLO Web). Options changed on thus subconnection:

URL = https://$PARENT_NAME$-ilo

Login = Username and password entered with Auto fill and Auto submit checked

Using this connection, it successfully connects and I can see the web management UI. However, when I attempt to open the .NET Integrated Remote Console, it pops open the external window where IE normally downloads the Integrated Remove Console .NET binaries then this fails with the error message "Cannot download the application. The application is missing required files." Log file is attached.

I have tried to change the connection to Display = External, however it still opens as a tab in the RDM window. I've also gone to Options > Types > Web and changed Web = 'Internet Explorer' and IE Mode = 'IE 11' (which is the installed browser as this is a Windows 10 machine).

This feature would be a big win for us if we can get it working properly. Any help would be appreciated.

1 - 8 of 8 items