Users

All Posts (24)

avatar

srobitaille

Disabled

11.5 RDM - Load from Inventory Results

avatar
avatar
avatar
avatar
srobitaille
Disabled

Hi Felix,

based on your answers, I think the most plausible cause of the failure is that your session credentials don't have the required privileges to connect to the remote computer (using WMI), while your local Windows account do.

I did some modifications in RDM to add-back support for this use-case. You should be able to see the changes in the next beta version.

Let me know if you still have any issue.

Best regards

Sébastien

11.5 RDM - Load from Inventory Results

avatar
avatar
avatar
avatar
srobitaille
Disabled

Hi Felix,

Ok, at this point my understanding is that RDM uses the session's credentials to get inventory data from the remote computer. For some reason, it doesn't work for you. Let's try to find out why...

What kind of session are you using? RDP?

When you put your own Windows credentials under Tools ("use custom credentials"), does it work?

If you take the session`s credentials and copy them under Tools, does it work?

When you click on the button next to the Mac Address in the Information page (the one with a magnifier icon) and then go to the Applications Logs (under Help), do you see something?

Sébastien

11.5 RDM - Load from Inventory Results

avatar
avatar
avatar
avatar
srobitaille
Disabled

Hi Felix,

Are you on a domain? Can you normally access those remote computers using your own Windows account (the Windows account that runs RDM)?

Also, can you check and tell me if you have credentials defined for Tools in your Session properties?

I'm asking these questions because there was a slight change of behavior introduced in the code a month ago (how we choose credentials) and I want to make sure it's not what's causing those errors on your specific setup.

Best Regards

Sébastien

HP Lights-Out Stand Alone Remote Console for Windows

avatar
avatar
avatar
avatar
avatar
srobitaille
Disabled

Hi KajLehtinen,

your scenario will be supported in the next beta version of RDM.

You will also need the new version of the AddOn (v1.2.0.0 which will be available by then)

Let us know how it goes.

Regards,

HP Lights-Out Stand Alone Remote Console for Windows

avatar
avatar
avatar
avatar
avatar
srobitaille
Disabled

Hi KajLehtinen,

We recently did something similar for some other variables. I will verify if we can do something specific for $REMOTE_MANAGEMENT_SERVER_HOST$ also...

I'll get back to you.

Regards,

FeatureRequest: fastviewer

avatar
avatar
avatar
avatar
avatar
srobitaille
Disabled

Hi Giovanni,

I think this is a very good idea.

Unfortunately, I cannot think of a solution right now that will work all the time and won't put user credentials at risk.

I will keep thinking about it...

The best solution would be that FastViewer themselves add some parameters to their application so that our add-on could simply pass the credentials to it.

Maybe you could ask them? Sometimes when requests are coming from paying customers, things go faster.

In the mean time, as a work around you could try creating a macro (to which you can pass custom fields containing the username and password).

Best regards,

HP Lights-Out Stand Alone Remote Console for Windows

avatar
avatar
avatar
avatar
avatar
srobitaille
Disabled

Hello KajLehtinen,

just to let you know, we added two new variables in RDM to help support your specific scenario:

$REMOTE_MANAGEMENT_SERVER$

$REMOTE_MANAGEMENT_SERVER_HOST$

It will be available in the next version of RDM.

Best regards,

Array VPN add-on

avatar
avatar
avatar
avatar
avatar
srobitaille
Disabled

Hi Wybren,

the new version of the add-on is now available in the Add-On manager.

Best regards,

FeatureRequest: fastviewer

avatar
avatar
avatar
avatar
avatar
srobitaille
Disabled

Hi Giovanni,

an updated version of the Add-On with this new parameter is available.

Please try it and let me know if everything is fine now.

Best regards,

FeatureRequest: fastviewer

avatar
avatar
avatar
avatar
avatar
srobitaille
Disabled

Hi Giovanni,

I did some tests and passing "fvw" to FastMaster seems to do the same as the "Connect" menu in Remote Manager.

Can you confirm? If it works, I will add this parameter to the AddOn.

Ex:

FastMaster.exe /reAutoconnect:{your guid} /reConnect:fvw

Best regards,

FeatureRequest: fastviewer

avatar
avatar
avatar
avatar
avatar
srobitaille
Disabled

Hi Giovanni,

We're using the "/reConnect" parameter to pass the connection type to FastMaster.

In the documentation, there are only 4 accepted values for this parameter: rdp, presentation, conference, support

When the "Default" value is selected in the Add-On, we just skip this /reConnect parameter and do not provide it to FastMaster.

When leaving the Add-On to "Default", are you sure it doesn't do the same thing as the "Connect" menu in FastViewer Remote Manager?

If you're aware of another parameter that we can pass to FastMaster, I will be happy to add it!

Best regards,

Add-on Request: Angry-IP Scanner // RidNacs

avatar
avatar
avatar
avatar
srobitaille
Disabled

Hi Thomas,

We usually integrate third-party applications only if they provide a usable API, or at least some command-line parameters that we can use.

If this application is a must for you, I suggest you try contacting the owners of this open source project instead. They are the one who are in the best position to improve their own app. Once they provide an API, we will be happy to look at it!

Best regards

Array VPN add-on

avatar
avatar
avatar
avatar
avatar
srobitaille
Disabled

Hi Guest,

Did you try with the add-on attached to my previous post?

FeatureRequest: fastviewer

avatar
avatar
avatar
avatar
avatar
srobitaille
Disabled

Hello,

The add-on for FastViewer is now publicly available and can be downloaded from our website:

http://remotedesktopmanager.com/Home/AddOn#SessionAddOn

Please give us some feedbacks!

Best regards

Add-on Request: Angry-IP Scanner // RidNacs

avatar
avatar
avatar
avatar
srobitaille
Disabled

Hi guys,

I took a look at both links.

Do you know if these tools have an API or command-line parameters that we could use to do the integrations? I didn't found the info on their web sites (and the RidNacs site seems to be in German language only :-))

Best Regards

FeatureRequest: fastviewer

avatar
avatar
avatar
avatar
avatar
srobitaille
Disabled

Hi Giovanni,

thanks for the details.

I implemented something similar in the AddOn (but a bit more robust to avoid sending the credentials to the wrong window/process).

I have a preliminary version of the AddOn ready. If you would like to give it a try, send me a private message and I will provide it to you so that you can give me your feedbacks.

Best Regards

FeatureRequest: fastviewer

avatar
avatar
avatar
avatar
avatar
srobitaille
Disabled

Hi Giovanni,

can you share the details of your solution with us?

Maybe your approach can help us develop a better AddOn.

Best Regards

FeatureRequest: fastviewer

avatar
avatar
avatar
avatar
avatar
srobitaille
Disabled

Hi,

I better understand now. Thanks for the pointer.

I will add the /reAutoconnect GUID to the list of parameters supported by the AddOn.

According to their documentation, there doesn't seem to be a way to pass the username and password to FastViewer when using Remote Access (only when using a session).

Unfortunately, without support in FastViewer to pass the username and password, I'm afraid there is not much that we can do.

Best regards

FeatureRequest: fastviewer

avatar
avatar
avatar
avatar
avatar
srobitaille
Disabled

Hi Giovanni,

thanks for your feedback.

We were planning to let the user provide the following parameters:

SessionId

ClientName

Password

But in your example, you are using the /reAutoconnect parameter and not /SessionId.

So I don't think that you are talking about the clientname and password associated to a session, are you?

Can you explain what is your usage scenario with this /reAutoconnect:guid parameter?

I'm not sure I understand what it is and how it's used.

Best Regards

FeatureRequest: fastviewer

avatar
avatar
avatar
avatar
avatar
srobitaille
Disabled

Hi,

just a quick update to tell you an AddOn is currently being developed.

We are planning to use the COM interface to allow opening FastViewer session in RDM according to the session ID provided by the user.

Hopefully, I will have more info to share later this week.

Best regards

Inconsistent behavior of $HOST$ in shared template

avatar
avatar
avatar
avatar
srobitaille
Disabled

Hi Thomas

Happy to hear it works according to your expectations!

Thanks again for your feedback.

Best regards,

Hana HBStudio

avatar
avatar
avatar
avatar
srobitaille
Disabled

Hello Spooner,

we have a preliminary version of a AddOn for Hana Studio that is ready to be tested.

Let me know if you would like to give it a try!

Regards,

Inconsistent behavior of $HOST$ in shared template

avatar
avatar
avatar
avatar
srobitaille
Disabled

Hi Thomas,

we took your feedback into account and implemented the solution David described.

It will be available in the next version of RDM.

Please let us know if you have any other issue or comment.

Regards

Sébastien

Array VPN add-on

avatar
avatar
avatar
avatar
avatar
srobitaille
Disabled

Hi Wybren,

Can you please try again using the updated add-on attached to this message?

Both problems that you reported (connection + credential repository) should be fixed in this version.

To install the new version, use the Add-On Manager under the Tools menu in RDM and then select "Manual installation" after selecting the IBM Softlayer VPN AddOn.

Please let us know if you have any other issue.

Regards

Sébastien

1 - 24 of 24 items