Identity in favorites updates don't propagate and cannot edit identities after restart
The issue is already shown in the last video I uploaded. It is a very persistent and easy to reproduce problem. Even after upgrading to the 2026.3.12 it is still present. I do not see how you don't have an angry mob screaming at the gates. This is a big issue which I have been able to reproduce across 3 different systems and every release from 2026.2 through 2026.3 version. From the favorites any entry you edit while viewing it in the favorites view of the Navigation panel then update the password or the host name and choose save. If you open its properties again the changes will not be present. The only way to edit and save properties is from the vault view not the favorites view.
Identity in favorites updates don't propagate and cannot edit identities after restart
I installed 2026.3.10 and I can now use the Navigation panel after restart when the reconnect dialogue is still open. However, the other issue still persists. The ID entry that I added to favorites if I select it from favorites and edit the entry my updates to the password are not saved. I can only edit them from the vault view. I have recreated this consistently with different system and versions after 2026.2 through 2026.3.10.
Identity in favorites updates don't propagate and cannot edit identities after restart
I am attaching a video of the issues. I can regularly reproduce them on other laptops i install rdm on so I must not be describing the issue sufficiently. Hopefully this video will clarify.
Identity in favorites updates don't propagate and cannot edit identities after restart
Since i have downgraded i had to install rdm on another system to test it out. Allowed it to upgrade to the latest version 2026.2.18 and it still has the same problem. on a different host any version since 2026.2 if you edit any part of the entry while in the favorites panel and choose save and then reopen it what you saved will not be present and the entry launched from favorites will launch with the old parameters. This is easily reproducible. However, if i edit in the favorites panel choose save then switch to the vault panel and open the entry the changes saved in the favorites panel will be present in the vault panel and choosing save from vault will make them available in both the vault and favorites panel.
As far as choosing the restore panel title and then the navigation panel that doesnt work either.
Identity in favorites updates don't propagate and cannot edit identities after restart
I had to downgrade to 2026.1.24. All other versions since then appear to have the issue where I cannot edit the id items after reboot but for choosing reconnect to past connections and they have the issue where editing entries in favorites save to the vault while the old entry stays in the favorites view .
Identity in favorites updates don't propagate and cannot edit identities after restart
The bigger issue is not being able to edit entries on restart while the dialogue to reconnect previous sessions is up. I used to be able to do this so I could update changed passwords so that the session reconnects would succeed
Identity in favorites updates don't propagate and cannot edit identities after restart
I am using a local data source under AppData\Local\Devolutions\RemoteDesktopManager\Connections.db. I really only have 1 id item that changes regularly added to my favorites which when I edit from there it doesn't update in favorites unless I edit it from the vault directly. Haven't tried any other. I just tested it with another ID added to an ID group in favorites. I edit the password adding a 123 at the end and save. Then I reopen it under favorites and the 123 isn't there but if I switch back to vault and open the ID the 123 is there and if I save then it shows up in favorites and works from favorites. No delay if I edit it from vault.
Identity in favorites updates don't propagate and cannot edit identities after restart
Identity in favorites updates don't propagate and cannot edit identities after restart but before open previous version 2026.2.17.0 64-bit (JIT)
Since updating to 2026.2.16 and 17 I am having several issues
I have an id that changes password daily so I placed it in my favorites. However now when I edit it and save it still shows the old password in favorites but when I switch back to the vault it shows the new password and then when I save there it finally propagates to favorites. It is as if the favorites view is holding on to a cached copy.
If I restart RDM I used to be able to open the navigation panel and edit my admin id to change the password and then answer yes to the open previous sessions. Now the panel just beeps when I click it and will not open forcing me to cancel the open previous sessions
Update to 2025.2.13.1 - vi screen update issues and nonprinting characters appearing on screen
I downgraded back to 2025.1.41.0 because it wasn't able to work. I'll have to see if I can setup an isolated instance of the new version.
Update to 2025.2.13.1 - vi screen update issues and nonprinting characters appearing on screen
I tried 2025.2.14.0 and I am still having the same issue.
Update to 2025.2.13.1 - vi screen update issues and nonprinting characters appearing on screen
Since I have updated to 2025.s.13.1 when I try to edit files in vi or vim scrolling up after scrolling down results in the updates only appearing at the line at the very top of the screen while the rest of the screen does not update. Also, now when I list output periodically lines end with a bunch of vertical rectangles likely indicating the output contains non-printing characters. None of this happened prior to uprading.
SSH Session copy wrapped text is adding LF
Actually it seems like its preserving what I see on the screen with the wrapping by inserting CR or LF when I copy. The behavior I'm looking for is to just leave a long line long. I don't want to copy and paste it as I see it on the screen with the wrapping intact I want to copy and paste it as the long line it is in real life. So I want to have it wrap on the screen but when I select it I don't want it to add CR or LF where the line wraps at the right of the screen, just preserve original CR and/or LFs that were there in the original data.
Regards,
Devin
SSH Session copy wrapped text is adding LF
I am running RDM 2019.1.41 on Windows 10. When I cat a file on any of the Linux systems I manage if the lines are longer than the screen width it will auto wrap them. This is fine but when I select these lines and try to paste them into another session or notepad LF (line feeds) are added and the lines are broken up into multiple lines. If I'm copying a command line script or an encryption key this corrupts it so that it doesn't work on the target system. When I use xterm on my linux workstation it will wrap on the screen but when I copy it doesn't add CR or LFs and keeps each line intact. Any help you can get with resolving this would be much appreciated.
Devin