Remote Desktop Manager Closing without message back to desktop on windows 10
Hi Guys
Just an update. This problem was caused by an option I had ticked to enable Cross Fire for applications that do not have a cross fire profile.
Unchecking that box corrected the problem with the latest AMD driver.
Cheers
Rod.
Remote Desktop Manager Closing without message back to desktop on windows 10
Hi all
Problem solved - it was the latest ATI video card driver for windows 10.
uninstalled driver and let windows install the one from windows update and Remote Desktop is working again
Cheers
Rod.
Remote Desktop Manager Closing without message back to desktop on windows 10
Just got an error in the windows event logs - First one :)
it appears there is a problem with the ATI video driver
it was updated about a week ago - so I will roll it back and see if the problem is fixed.
Cheers
Rod.
Remote Desktop Manager Closing without message back to desktop on windows 10
Hi
I have Remote Desktop 10.6.7 enterprise running on windows 10 enterprise.
Up until yesterday everything was working fine.
Now when I run remote desktop manager and attempt to RDP to any machine, Remote desktop manager just closes.
There is no error - just the workspace where the RDP window is usually shown goes black, then the whole application closes.
I am wondering if anyone else has had any issues like this or might offer some suggestions.
I tried to view the logs - but there is nothing in them about the attempted session connection - its like it doesn't get an opportunity to write the logs.
This problem happens with both 32 and 64 bit Remote Desktop Manager.
I am able to use normal RDP to remote to the computers I am trying to access with Remote Desktop Manager.
I have run an SFC /scannow and repaired some corrupt system files and I have also re-installed remote desktop manager twice - once before corrupt files fixed and once after.
I still have the same results - it just disappears.
Any help or advice would be much appreciated.
Regards
Rod.
Make screen size fit current tabbed window area
ah ok - I'll see how I go with a reduced desktop size and see if its usable
Thanks for the prompt assistance
cheers
Rod
Make screen size fit current tabbed window area
So is this a known issue - or is there something I can do to make that work?
Its usable without remotefx so its not a major issue - but would be nice to use the accelerated graphics is possible
Make screen size fit current tabbed window area
OK - with remoteFX removed from VM it works
Make screen size fit current tabbed window area
Any thoughts on how to make this work for RemoteFX VM's?
Make screen size fit current tabbed window area
Ok - I think I have found the problem - the two machines that are giving issue have remoteFX adapters - if I connect to a machine that doesn't have remotefx - it works properly
Make screen size fit current tabbed window area
now with attachment - sorry
Make screen size fit current tabbed window area
Here tis
thanks for such a quick response :)
Make screen size fit current tabbed window area
Hi - I have done that - but I still have scrollbars
I have attached a screen shot so you can see what I mean
Make screen size fit current tabbed window area
Hi - I am now to Remote Desktop Manager and so far have liked what I see - but am having an issue with screen sizing.
I am trying to display RDP sessions in the tabbed window at the size of the tab.
I have my settings set to Display -> Embedded, Remote Desktop Size -> Current Work Area
When I connect the session - it always opens up larger so there are scrollbars both vertically and horizontally.
I have 2 monitors - one is 1920x1200 (primary) and the secondary is a laptop panel 1920x1080.
Can anyone suggest how to make the tabbed rdp sessions fit so I don't have the scrollbars on the primary monitor?
I need to jump between quite a few sessions so really need the tabbed interface.
I am using version 9.2.10
Cheers
Rod.
edited by Roddles on 9/18/2014