mdede

I'm very disappointed about Wayk Now free dismission, I don't understand.... Ok, it's not your primary business, but probably it was better to maintain also a free stand-alone version......

Regards.

Hi, here the Symantec SEP 14.2.2 Win 64 bit, English language, we use it at work

https://send.firefox.com/download/55da51cf23875bf2/#inMEeOHckZ5iVhkYwOtY5w

I hope you'll solve your problem with it.

Regards and thank for your job.

Bye from a quarantined covid-19 IT guy......

Hi Shawn,

For future reference, did you uninstall SEP, or did you disable some features to make it work with Docker?

I would have one favor to ask you: it doesn't look easy to get a hold of the SEP downloads to make just a simple installation. I would like to install it once just to test if I can quickly detect its presence in PowerShell, and then add a simple warning for users when launching Wayk Den. If you can find a direct download link, or upload the installer to something like firefox send (https://send.firefox.com/) and send it to me at wayk@devolutions.net, it would be greatly appreciated. I don't need a license, I just want to install it without using it, just to figure out a way to detect its presence on the system. If you don't have access to the SEP downloads, that's fine, but I thought I would ask.

Thanks!

Best regards,

I confirm that today from Italy Wayk is not working, no green light on client.

Sorry, here the log

Sorry, but there're still problems with proxy and last release 3.2.1, no connection, no wayk source ID generated, here the log.....

Regards

Testing 3.2 but problems with lan proxy, please look at my reply here :

https://forum.devolutions.net/topic30629-wayk-now--problem-with-lan-proxy.aspx?messageid=128178&Page=1#post

thanks, regards

I'm testing Wayknow free 3.2.0 but I get problems using it with proxy, I'm running it on a win7 prof machine, same proxy, same settings, but it's not able to get a valid ID; the message is "Connecting to Waykden......."

I check proxy key in registry and they are ok (HKCU has proxy, HKLM no), I attach here log for debug.

I make also a try with a direct internet connection (no proxy) and the new release works, I remember that old one 3.1.x worked with proxy....

To solve this proxy problems probably is better to explicit proxy setting in Wayknow parameters and use standard TCP protocol to get out, example http, https, etc.....

I have also another bug / feature request : when you connect to a remote machine and the disconnect, on host machine the Wayknow password change immediately, instead with Teamviewer a dynamic generated password doesn't change until you force a manual change or you close and re-run the program.

Probably is better TV in this way because if you lost connection (for example for poor internet connection) then you'll never be able to re-connect to wayknow host because in the meantime the password is changed ! The dynamic generated password for an ID should change only forced or when you run the program with a new istance.

Thanks, regards

Ok, thanks, please could you add my email address to your new release mailing, so I'll be advised when you'll release next Wayknow program.

Regards

I have the problem yesterday at home, so I attach here the logs of both Wayk programs, the HOST is the pc in office, the one I try to connect from home.

I attach also a picture with error connection.

Thanks for your support.

Regards

Yes, I confirm that I use only Wayk ID to try connection, and the host machine is always turned on, no sleep, no hybernate, no network card turn off.

I'll capture some logs next days so you can check.

Thanks, regards.

I'm using the portable versione , this one :

https://wayk.devolutions.net/home/thankyou/waykbin

Thanks.

I'm using Wayknow free 3.1.1 on Windows, I run it on my office pc and then I connect remotely from home pc to my

office pc.

All works fine if I connect in few hours, but if I try a connection after 1 or 2 days it's impossible to get a remote working

connection, on home pc I say a message that say it's impossible to connect to xxxxxxx ID.

When I return office I check and I see that Wayknow on office pc is still running and it's in Ready state, but it's no more

able to accept remote connections...., I have to close it and re-open it to have incoming connections working again.

So my question is : is there a timeout validity on SOURCE ID and PASSWORD generated on Wayknow or it should always

work , also after some days ?

However, congratulations for the excellent work, Wayknow is better at every release.

Thanks, regards

OK, I understand, effectively is strange that there's no proxy setting under HKCU, I manually modify the HKCU registry key with my correct proxy setting, enabled the "Prioritize relay servers for peer-to-peer connections" option in Wayk and not it works perfectly !

One suggestion : probably in next Wayk releases is better to check both registry location (HKLM and HKCU) and if one of these locations contain a value for the ProxyServer key (is not empty like in my case....) you should use it for Wayk.

However you make a great program !

Thanks again for your support.

Regards

The machine is a win10 pro 64 bit pc, my proxy is 192.168.2.232:8080 for web and 192.168.2.232:1080 for socks, our proxy don't use authentication, it checks machine mac address to authorize or not.

Please find attached registry export and internet settings screenshot.

Regards

Tried last 3.1 release but I'm still not able to connect via proxy with Wayk, I tried also the new "Prioritize relay servers for peer-to-peer connections" option but with no success.

Here the captured log.

I think you should add a specific proxy option in your program, so we'll be able to "force" some settings here like proxy address, port to use, authentication, socks, etc......

Thanks for your support.

Regards

No problem, it's not an urgent matter, you're stiill in beta, so... we can make all tests.

I think the problem is in registry, I don't find the proxy setting ip server under HKCU but in HKLM, I attach the exported reg files so it will be clear, sincerely I don't understand why proxy settings is present both on local user and local machine registry paths.....

I made a full search on registry to find every key where my proxy IP appears, I attach all files here.

Thanks for your support and good work

I'm able to connect over local lan with hostname / IP address, but when I try a remote connection I get always the messages :

- Connecting to Wayk Den

- Disconnected from Wayk Den

and Source ID is empty.....

I attach some screenshots.

Regards

I tested beta8 but I was not able to make a connection with a Windows 7 prof 64 bit pc.... please could you send me an image of your internet settings in control panel so I can check them ?

thanks, regards

I attach my proxy settings for "normal" client (proxy1, usually only web navigation) or "full" client (proxy2 with socks support).

I think you can get proxy set from a Windows machine with this commands :

reg query "HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings" | find /i "proxyserver"

or

netsh winhttp show proxy

We don't use authentication on our proxy, we use pc Mac addresses to categorize them, so we use the internal hardware address of nic to authorize a pc on proxy, but on other environments probably someone use authentication, in Windows Server lans probably AD users....

Regards

In out Lan every clients pc goes out on Internet via proxy, any Tcp or Udp port should go via proxy.

Normally we use standard ports like 80-443-21 and so on and when we need that a client use stange ports the better way is to sockify the program, we simply set the program to use SOCKS protocol on port 1080 and the program "tunnels" its protocols over this port via proxy.

Probably the best way to test your app is to install a proxy on your test Lan and try, there're a lot of free proxy programs for windows or Linux, also our CCProxy program is free with 3 users limit (http://www.youngzsoft.net/ccproxy/), so you can install it on any Windows pc and make some tests.

FYI : many remote control programs like TeamViewer, Anydesk or Supremo are able to work with proxy without socks but only on standard port like http or https I presume... (I personally tested them on my lan and some programs like TV get automatically proxy settings from Windows and use them, other need a proxy set in their parameters); I'm not a programmer (I'm a sys admin / blogger) but I think the right way is to "tunnels" your protocols over standard port when you get a proxy on Lan, in this way the program runs immediately and it's trasparent to end user.

Don't hesitate to contact me if you need some tests....

Regards

Ok, I tested the Italian translation on Windows Wayk program and for me it's ok, you can use it in next releases.

I attach the json file here.

Please advise me when you'll release a beta Wayk with Lan proxy support so I can test it in our environment.

Thanks for your porgram and your support.

Regards

> As for the translation, I attached the current English json file that you can translate to Italian if you wish to do it :)

>

> Since Italian is currently not listed in our UI, you can simply rename it to "fr.json" and copy it to "%AppData%\Wayk\locales\fr.json" and select

> "French" as your language. From there, you can edit the fr.json file and restart Wayk Now to see your Italian translations.

I attach the Italian translation, but I'm not sure about it because I was not able to test / debug it on Wayk program, I don't find the path with *.json files on my machine ! I search also all disk content but no fr.json or other file similar on it (please look at wayk.txt for all files and dir I find under the %appdata% path : where I find the txt logs in the past).

Please tell me how to test the Italian language... do I need a special executable for that ? I tried both the portable and the MSI installer of Wayk but no path for json file appears on file system.

Thanks.

Regards

I confirm you that also last beta version doesn't work with proxy (as you say....)

However please find attached log (trace) if you need it.

I'm working on Italian translation.....

Thanks, regard

Ok, thanks, let me know if you need more tests also on beta version, or translation in Italian language of your program if you need that.

Regards

PS : I don't find on your web site the download for beta 3 release....

Thanks for your reply, here's the log in DEBUG level, I think you should get proxy settings directly from OS or put a new setting inside Wayk Now, actually our lan proxy supports standard protocols like http, https, socks v4 and v5 , etc..... it's a simple Windows program : CCPROXY, for more info their web site is :

http://www.youngzsoft.net/ccproxy/

Please let me know if you need more logs or tests.

Thanks again.

regards