I updated RDM , I have a ssh forwarding configuration, but now I always keep having this issue
5/17/2024 1:19:53 PM] Sending kex init
[5/17/2024 1:19:53 PM] Received kex init
[5/17/2024 1:19:53 PM] Selected algorithms: curve25519-sha256, ecdsa-sha2-nistp384, aes256-ctr, aes256-ctr, hmac-sha2-256, hmac-sha2-256, none, none
[5/17/2024 1:19:53 PM] Sending Ed25519 kex init
[5/17/2024 1:19:53 PM] Received Ed25519 kex reply
[5/17/2024 1:19:53 PM] Successfully authentified server
[5/17/2024 1:19:53 PM] Sending new keys message
[5/17/2024 1:19:53 PM] Received new keys message
[5/17/2024 1:19:53 PM] Sending userauth service request
[5/17/2024 1:19:53 PM] HMAC verification failed
[5/17/2024 1:19:53 PM] Disconnection in progress
[5/17/2024 1:19:53 PM] Bytes sent: 1536, Bytes received: 1492
[5/17/2024 1:19:53 PM] Packets sent: 4, Packets received: 3
[5/17/2024 1:19:53 PM] Kex completed: 1
[5/17/2024 1:19:53 PM] Disconnecting
[5/17/2024 1:22:14 PM] Devolutions Protocols version: 2024.4.16.1 Windows
[5/17/2024 1:22:14 PM] Terminal font: Courier New [Courier New, fixed=True]
[5/17/2024 1:22:14 PM] Starting SSH, verbose level: 2
[5/17/2024 1:22:14 PM] Setting up connection
[5/17/2024 1:22:14 PM] Connecting to port: 22 (IP any)
[5/17/2024 1:22:14 PM] SSH banner: SSH-2.0-9.37 FlowSsh: Bitvise SSH Server (WinSSHD) 9.37: free only for personal non-commercial use
last version is 2024.1.29.0, I had to rollback to 2024.1.12.0
the ok output looks like this
[5/18/2024 12:39:15 PM] Starting SSH, verbose level: 2
[5/18/2024 12:39:15 PM] Setting up connection
[5/18/2024 12:39:15 PM] Connecting to port: 22 (IPv4 - 6)
[5/18/2024 12:39:16 PM] SSH banner: SSH-2.0-9.99 FlowSsh: Bitvise SSH Server (WinSSHD) : free only for personal non-commercial use
[5/18/2024 12:39:16 PM] Sending kex init
[5/18/2024 12:39:16 PM] Received kex init
[5/18/2024 12:39:16 PM] Selected algorithms: curve25519-sha256, ssh-rsa, 3des-cbc, 3des-cbc, hmac-sha2-256, hmac-sha2-256, none, none
[5/18/2024 12:39:16 PM] Sending Ed25519 kex init
[5/18/2024 12:39:16 PM] Received Ed25519 kex reply
[5/18/2024 12:39:16 PM] Successfully authentified server
[5/18/2024 12:39:16 PM] Sending new keys message
[5/18/2024 12:39:16 PM] Received new keys message
[5/18/2024 12:39:16 PM] Sending userauth service request
[5/18/2024 12:39:16 PM] Received extension info message
[5/18/2024 12:39:16 PM] Server accepts public key types: ssh-ed25519,ecdsa-sha2-1.3.132.0.10,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,rsa-sha2-512,rsa-sha2-256,ssh-rsa
[5/18/2024 12:39:16 PM] Received service accepted message
[5/18/2024 12:39:16 PM] Sending userauth init request
[5/18/2024 12:39:16 PM] Received userauth banner: Welcome , you are trying to enter to Bitvise server
Welcome , you are trying to enter to Bitvise server
[5/18/2024 12:39:16 PM] Received userauth failure: publickey,keyboard-interactive,password
[5/18/2024 12:39:16 PM] Starting interactive authentication
[5/18/2024 12:39:16 PM] Sending userauth interactive request
[5/18/2024 12:39:16 PM] Received userauth info request:
[Name->Password authentication]
[Prompt->Password: ]
[5/18/2024 12:39:16 PM] Sending userauth interactive response: 1
[5/18/2024 12:39:16 PM] Received userauth success
[5/18/2024 12:39:16 PM] User authenticated successfuly by password interactive
Listening on 127.0.0.1:10006 D
the destination server is a bitvise, I could take this information
<event seq="154" time="2024-05-18 12:34:34.288526 -0500" app="BvSshServer 9.37" type="Info" name="I_CONNECT_DISCONNECTED_NORMALLY" desc="Connection disconnected normally.">
<conn id="1032" winSesId="C1032" service="SSH" remoteAddress="192.168.0.5:58678" virtualAccount="javus" windowsAccount="PE-00002\BvSsh_VirtualUsers" winSes="new" cacheUse="late"/>
<parameters reason="EofReceived" elapsedMs="2076516" socketBytesReceived="79896" socketBytesSent="12424" payloadBytesReceived="2525" payloadBytesSent="2116" channelBytesReceived="0" channelBytesSent="0"/>
<conns ssh="0" sshAuth="0" ftp="0" ftpAuth="0" nrWinSes="4" winSesUsesActive="0"/>
<help message="The client has disconnected the connection by sending EOF."/>
</event>
Can you fix the issue in the next version or if there any parameter that I can configure let me know please.
Hello,
Could you please verify that the algorithms are enabled in the Advanced menu of your SSH entry?
You can set them by switching the Algorithm support option to Custom and enabling all required missing algorithms.

Let us know if that helps.
Best regards,
Érica Poirier
Hello, thanks for the update.
I already did it , I mean I use all the options and also I use specific options, but I always got the same result.
I only could get it to work when I downgrade RDM.
Hello,
Would it be possible to send us a screenshot of your configurationsin the Advanced menu of your SSH entry?
Best regard
Carl Marien