No SSH connection to Cisco ASR9001 error Fail (-1) non specific error ver. 2022.1.27.0 64-bit

No SSH connection to Cisco ASR9001 error Fail (-1) non specific error ver. 2022.1.27.0 64-bit

avatar

Hello, try to connect to my new hardware Cisco ASR9001, and getting error Fail (-1) non specific error
Putty client working without problem

[15.05.2022 12:58:39] Devolutions Protocols version: 2022.4.28.1 Windows

[15.05.2022 12:58:39] Starting SSH, verbose level: 4

[15.05.2022 12:58:39] Setting up connection

[15.05.2022 12:58:39] Connecting to port: 22 (IP any)

[15.05.2022 12:58:39] Empty pre-connection PDU, ingnored

[15.05.2022 12:58:40] SSH banner: SSH-2.0-Cisco-2.0


[15.05.2022 12:58:40] Sending kex init

[15.05.2022 12:58:40] Received kex init

[15.05.2022 12:58:40] Selected algorithms: ecdh-sha2-nistp256, ssh-rsa, aes256-ctr, aes256-ctr, hmac-sha2-512, hmac-sha2-512, none, none

[15.05.2022 12:58:40] Sending ECDH kex init

[15.05.2022 12:58:40] Received ECDH kex reply

[15.05.2022 12:58:40] Successfully authentified server

[15.05.2022 12:58:40] Sending new keys message

[15.05.2022 12:58:40] Sending userauth service request

[15.05.2022 12:58:40] Received new keys message

[15.05.2022 12:58:40] Received service accepted message

[15.05.2022 12:58:40] Sending userauth init request

[15.05.2022 12:58:40] Received userauth failure: keyboard-interactive,password

[15.05.2022 12:58:40] Starting interactive authentication

[15.05.2022 12:58:40] Sending userauth interactive request

[15.05.2022 12:58:40] Received userauth info request:
[Prompt->Password: ]

[15.05.2022 12:58:40] Sending userauth interactive response

[15.05.2022 12:58:40] Received userauth success

[15.05.2022 12:58:40] User authenticated successfuly by password interactive

[15.05.2022 12:58:40] Sending session channel open request: 0/-

[15.05.2022 12:58:40] Received channel open confirmation: 0/1 WS 200000/200000 MPS 32000/32000

[15.05.2022 12:58:40] Sending pty request: 0/1 xterm-256color width = 155 height = 41

[15.05.2022 12:58:40] Received channel success: 0/1

[15.05.2022 12:58:40] Sending environment variable request: LANG=en_US.UTF-8 0/1

[15.05.2022 12:58:40] Received channel failure: 0/1

[15.05.2022 12:58:40] The server did not accept the environment variable

[15.05.2022 12:58:40] Sending shell request: 0/1

[15.05.2022 12:58:40] Received channel failure: 0/1

[15.05.2022 12:58:40] Shell request failed
[(-1) Non specific error.]

[15.05.2022 12:58:40] Disconnection in progress

[15.05.2022 12:58:40] Sending channel close request: 0/1

[15.05.2022 12:58:40] Bytes sent: 2160, Bytes received: 1746

[15.05.2022 12:58:40] Packets sent: 12, Packets received: 11

[15.05.2022 12:58:40] Kex completed: 1

[15.05.2022 12:58:40] Disconnecting

All Comments (2)

avatar

Hello,

please have a look over this Knowledge Base article: Error code FAIL (-1) non specific error

Regards,
Min

avatar
Hello,

please have a look over this Knowledge Base article: Error code FAIL (-1) non specific error

Regards,
Min

Thank you!
"Skip environment variable setup." did help me, tnx!