Some bugs for RDM for MAC

avatar

- I try to start RDM without connection to SQL database, my datasource does not switch to offline mode, and no entry are loaded.

The only way is to start it while connected to SQL server, and then go offline. But if I have to restart the computer, or quit and open again the application while I'm away from the office, there is no way to load any entry.

- When offline, if you try to create a new session, the new session is not displayed until you go back online, and offline again.

- Within an rdp session, "\" key is switched with "<" key on italian keyboard. All other special keys work correctly.

- Sometimes closing an rdp session makes another rdp session screen blank, the only way to get access again is to close and open it again, or click on "reconnect".

- On an rdp entry in the list, right click, "open with parameters", if you click on "prompt for credentials" you are prompted for credentials, but they are ignored by the terminal server (you have to insert them twice, once in RDM and once in remote RDP session).

RDM for MAC Enterprise Edition 4.0.1.1482504117 running on Mac OS Sierra 10.12.1

Many thanks in advance.

All Comments (32)

avatar

Updated topic with a new bug.

avatar

Hi,

I try to start RDM without connection to SQL database, my datasource does not switch to offline mode, and no entry are loaded.

The only way is to start it while connected to SQL server, and then go offline. But if I have to restart the computer, or quit and open again the application while I'm away from the office, there is no way to load any entry.

I seem unable to reproduce this issue. When I try to connect to the SQL Server and either the network is down or my server host unreachable, I get prompted with the following window offering me to go offline:

Maybe you could send me your application log after reproducing the issue so I can check if there is something else causing the issue.

When offline, if you try to create a new session, the new session is not displayed until you go back online, and offline again.

I think it should have been fixed in the beta version I previously sent you, or am I wrong? Is this a different issue?

Within an rdp session, "\" key is switched with "<" key on italian keyboard. All other special keys work correctly.

I seem unable to reproduce this behavior. I've added the Italian (Italy) keyboard in my remote machine and tried the key I think you're referring to and they seem to write what's expected. I'm not familiar with the Italian keyboard though. Are you referring to those keys:

Sometimes closing an rdp session makes another rdp session screen blank, the only way to get access again is to close and open it again, or click on "reconnect".

I'll have to investigate this further, but I'll inform you as soon as there is any progress.

On an rdp entry in the list, right click, "open with parameters", if you click on "prompt for credentials" you are prompted for credentials, but they are ignored by the terminal server (you have to insert them twice, once in RDM and once in remote RDP session).

I reproduce the issue. I've removed the first prompt since I didn't see the purpose of it in the Mac version of the application. Just tell me if it cause any other issue when you get to try the next version.

Best regards,

Xavier Fortin

avatar

Hi,

I seem unable to reproduce this issue. When I try to connect to the SQL Server and either the network is down or my server host unreachable, I get prompted with the following window offering me to go offline:

Maybe you could send me your application log after reproducing the issue so I can check if there is something else causing the issue.

Hi Xavier, if you send me instructions on how to create the log you want I will be glad to send you it.

I'm not sure if the problem exist if you're not connected to the network, I'm always connected to a network.

But I'm sure the problem exist if the server is not reachable.

I think it should have been fixed in the beta version I previously sent you, or am I wrong? Is this a different issue?

No, it's a different issue. The issue you fixed in the beta was about modifying an existing entry (if you tried to edit an entry, it was not edited while offline), and the problem is fixed.

The problem I'm having now is that if you try to create a new entry, it is not displayed until you go online, and come back offline.

I seem unable to reproduce this behavior. I've added the Italian (Italy) keyboard in my remote machine and tried the key I think you're referring to and they seem to write what's expected. I'm not familiar with the Italian keyboard though. Are you referring to those keys:

The keymap of the picture is correct, and you perfectly understood which keys are "swapping" :)

in an rdp session, if you type the "<" key of your picture you get the "\" key, and viceversa. All the other keys are working.

I'll have to investigate this further, but I'll inform you as soon as there is any progress.

If it can be helpful for you, I have an update. Let's suppose you have four rdp sessions opened, session1, session2, session3 and session4, and you log out from session2:

Scenario1: you logout from session2, you wait for the terminal session to close, and you go to session1 ---> no problems.

Scenaroi2: you logout from session2, you immediately switch the focus to session1 (before remote session2 completes the logoff process) ---> as soon as session2 closes, session1 gets blank, session 3 and 4 are ok. I've tried many times, and just the active session gets blank.

I reproduce the issue. I've removed the first prompt since I didn't see the purpose of it in the Mac version of the application. Just tell me if it cause any other issue when you get to try the next version.

Wait! I think that the purpose of the first prompt is for rdp session with NLA authentication (SSO), please check if it works with NLA TS before removing it completely from RDM!

Best regards,

Thank you very much for your help Xavier!

avatar

Hi,

You can find your application log under Help -> View Application Log. You can copy the content of the window with the Copy button and send it to me via private message.

No, it's a different issue. The issue you fixed in the beta was about modifying an existing entry (if you tried to edit an entry, it was not edited while offline), and the problem is fixed.

The problem I'm having now is that if you try to create a new entry, it is not displayed until you go online, and come back offline.

That's the weird thing. You see, the issue was that between two versions of RDM, a part of the code that was responsible to ensure the displayed connection tree was up to date was broken. This happen after each modification (be it editing or adding a connection), which is why it should be fixed in this version too. I'm testing right now, and in my case, it does update. Are you having the same issue when deleting an entry?

I might find something in your log. Remind me again, are you using an SQL Server datasource?

The keymap of the picture is correct, and you perfectly understood which keys are "swapping"

in an rdp session, if you type the "<" key of your picture you get the "\" key, and viceversa. All the other keys are working.

I think I found the issue and it lies within the keyboard layouts offered by the operating systems themselves. The Itialian (Italy) keyboard in Mac as the top left key be "<" (and therefor has the key beside the right Shift key be "\"). The Italian keyboard Windows offer does the opposite (Go figure). Since an RDP session uses the layout on the remote machine side, there is few things we can do. Maybe installing a custom keyboard layout on the remote host.

Wait! I think that the purpose of the first prompt is for rdp session with NLA authentication (SSO), please check if it works with NLA TS before removing it completely from RDM!

The thing is, we work slightly different than Windows here. Since they use the DirectX component for their RDP implementation, it seems to handle the login prompt. In mac, we handle it directly. What did you mean, that this prompt would be required for RDP session requiring NLA or those that don't?

Best regards,

Xavier Fortin

avatar

Hi,

You can find your application log under Help -> View Application Log. You can copy the content of the window with the Copy button and send it to me via private message.

Ok I'll try and get back to you.

That's the weird thing. You see, the issue was that between two versions of RDM, a part of the code that was responsible to ensure the displayed connection tree was up to date was broken. This happen after each modification (be it editing or adding a connection), which is why it should be fixed in this version too. I'm testing right now, and in my case, it does update. Are you having the same issue when deleting an entry?

I rarely delete an entry, but I will try!

I might find something in your log. Remind me again, are you using an SQL Server datasource?

Yes, Microsoft SQL server express as datasource.

I think I found the issue and it lies within the keyboard layouts offered by the operating systems themselves. The Itialian (Italy) keyboard in Mac as the top left key be "<" (and therefor has the key beside the right Shift key be "\"). The Italian keyboard Windows offer does the opposite (Go figure). Since an RDP session uses the layout on the remote machine side, there is few things we can do. Maybe installing a custom keyboard layout on the remote host.

The italian keyboard layout of my 2015 macbook pro is exactly the same of your picture (I just checked), and in MAC Os everything is ok, but within a RDM RDP session \ and < are swapped.

The thing is, we work slightly different than Windows here. Since they use the DirectX component for their RDP implementation, it seems to handle the login prompt. In mac, we handle it directly. What did you mean, that this prompt would be required for RDP session requiring NLA or those that don't?

Best regards,

I mean that I don't know if that prompt is required when connecting to a NLA TS Server, I was just asking you to try, after you remove that prompt from the code, to check if everything works correctly with bot a classic TS and an NLA TS.

Thank you again tomorrow I will try again with offline and let you know!

avatar

When offline, if you try to create a new session, the new session is not displayed until you go back online, and offline again.

That's the weird thing. You see, the issue was that between two versions of RDM, a part of the code that was responsible to ensure the displayed connection tree was up to date was broken. This happen after each modification (be it editing or adding a connection), which is why it should be fixed in this version too. I'm testing right now, and in my case, it does update. Are you having the same issue when deleting an entry?

I might find something in your log. Remind me again, are you using an SQL Server datasource?

Hi Xavier, I had some time to test this problem:

Step1: Delete an entry: the problem does not happen, the entry is immediately removed from the view.

Step2: Add an entry: the problem does not happen, the entry is immediately added to the view.

Step3: Duplicate an entry: you choose to duplicate, you enter the name of the new entry, you change something (e.g. the ip address), you press ok. Here is the problem: the entry is not added to the view.

- If you go online and go back offline, the new entry (step3) is added to the view.

- Here is the funny part: if you duplicate an entry (step3) it is not added to the view, but if you add (step2) or delete (step1) an entry, the view is updated and the duplicate entry (step3) is added to the view without the need to go online and come back offline.