Devolutions inc. > Forum

1/5/2012 11:06:39 PM Space2Place Posts: 6	Hi together, i'd create some templates for RDP connections. There i use in local devices and resources the option "Secific drives" and select only drive d. But after the connection i don't see the drive d. If i change back to all drives everything works fine! Can you check this issue? Thanks
	0 • permalink
1/6/2012 3:35:16 AM David Hervieux Administrator Posts: 4248	What version of the RDP client do you use? Microsoft change their way of specifying it in the version 6.1. Do you open it in embedded mode or external? -- David Hervieux Devolutions inc.
	0 • permalink
1/6/2012 8:37:12 AM Space2Place Posts: 6	I have the version 6.0.6001 (Shellversion),
	0 • permalink
1/6/2012 8:44:43 AM David Hervieux Administrator Posts: 4248	And does it work in embedded mode? -- David Hervieux Devolutions inc.
	0 • permalink
1/8/2012 11:52:05 PM Space2Place Posts: 6	Ohhh sorry... I didn't read your last question... I'd tested the following issues... External => Specified Drive = No Drive appears Embedded => Specified Drive = No Drive appears External => All Hard drives = every drive appears Embedded => All Hard Drives = every drive appears
	0 • permalink
1/9/2012 5:08:55 AM David Hervieux Administrator Posts: 4248	Ok, I don't understand what could be the problem. I did most of my test with this update: http://support.microsoft.com/kb/969084 -- David Hervieux Devolutions inc.
	0 • permalink
1/9/2012 6:21:50 AM Space2Place Posts: 6	Great advise... I did install the patch, and now it works!
	0 • permalink
1/9/2012 8:07:40 AM David Hervieux Administrator Posts: 4248	Great! I'm glad that it now works -- David Hervieux Devolutions inc.
	0 • permalink

---